Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 5:50 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Mon Feb 23, 2009 7:10 pm 
Offline
Walnut
Walnut

Joined: Thu Feb 19, 2009 5:32 pm
Posts: 5
I'm a CNC professional on my day job, turning out custom sign parts. I took it into my head to try using the rig at work for inlay. Got the pearl laser-cut at my local trophy shop, and Saturday we cranked up the big machine to rout the ebony. (This sucker is almost 7 x 11 feet, with a high-powered head on it. Kinda like squirrel hunting with a bazooka.)

It all came out sweet. The Abalam wanted a quick stroking with fine-grit sandpaper, mostly because Miles at the trophy shop tuned things to not quite cut all the way through so as not to lose any of the parts,and there's just enough edge gap to allow a bit of squeeze-out.

Anyway, I have the files for a Martin-style tree of life covering 19 frets at 25.4 scale length. 1/8" and 1/16" bits. Is there a spot here to share this sort of thing?


Top
 Profile  
 
PostPosted: Mon Feb 23, 2009 9:46 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue May 02, 2006 9:02 am
Posts: 2351
Location: Canada
First name: Bob
Last Name: Garrish
City: Toronto
State: Ontario
Country: Canada
Status: Professional
You can attach files to your posts here, there's a box to do it right under where you type in your messages. If it won't let you, then I can host them for you on my webserver and put a link here. Just e-mail the file to bob@saintlutherie.com if it doesn't let you attach it and I'll put it on the server (and post a link message here).

So far as your forays into making parts go : congratulations, it's a lot of fun and frustration :). What sort of router are you cutting the pockets on?

_________________
Bob Garrish
Former Canonized Purveyor of Fine CNC Luthier Services


Top
 Profile  
 
PostPosted: Mon Feb 23, 2009 10:05 pm 
Offline
Walnut
Walnut

Joined: Thu Feb 19, 2009 5:32 pm
Posts: 5
We have two, actually, both made by an outfit called AXYZ, out of Canada I think. No automatic tool changes or anything... Mostly we use them to whack up big sheets of aluminum and plastic. (We do high-end signs for malls etc. all over the country.) We just did a major tune-up on the bigger one (7x10 foot bed,) so that's the one we used.

The only problem I've run into so far is that I have three small furry assistants, and one of them apparently made off with one small piece of shell. But Miles at the trophy shop still has the files, so I can get a replacement cut for a couple of bucks.

The files are on my work computer. Look for them tomorrow.


Top
 Profile  
 
PostPosted: Tue Feb 24, 2009 3:53 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 08, 2005 4:19 am
Posts: 1534
Location: United States
First name: Nelson
Last Name: Palen
Welcome to the clan, Jamie!
Nelson Palen


Top
 Profile  
 
PostPosted: Tue Feb 24, 2009 10:47 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Nov 28, 2006 1:44 pm
Posts: 1105
Location: Crownsville, MD
First name: Trevor
Last Name: Lewis
City: Crownsville
State: MD
Zip/Postal Code: 21032
Country: USA
Focus: Build
Status: Semi-pro
Cool, post some pics when you get a chance!

Trev

_________________
http://www.PeakeGuitars.com


Top
 Profile  
 
PostPosted: Tue Feb 24, 2009 11:15 pm 
Offline
Walnut
Walnut

Joined: Thu Feb 19, 2009 5:32 pm
Posts: 5
Will do.
At the moment I'm still gluing. I got the first 12 frets' worth glued in (though not cleaned up) by Sunday night. Monday's my night to play out. Tonight I got distracted by the President. Trying to get two or three more frets done tonight, if you all will leave me alone!
(Just kidding...)


Top
 Profile  
 
PostPosted: Wed Feb 25, 2009 10:18 am 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 08, 2005 4:19 am
Posts: 1534
Location: United States
First name: Nelson
Last Name: Palen
You were distracted from guitar making by the presidential address? Man, where are your priorities? gaah


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:38 pm 
Offline
Walnut
Walnut

Joined: Thu Feb 19, 2009 5:32 pm
Posts: 5
The President was one night. There's this project on my day job that's been kicking my butt. AND I've resumed performing after a 30-year hiatus!

Don't tell me not to burn the candle at both ends. Tell me where to get more wax!

Anyway here's the finished product. I'll be back in a few minutes to attach the actual files.
Attachment:
Fretboard2.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Mar 16, 2009 5:38 pm 
Offline
Walnut
Walnut

Joined: Thu Feb 19, 2009 5:32 pm
Posts: 5
The President was one night. There's this project on my day job that's been kicking my butt. AND I've resumed performing after a 30-year hiatus!

Don't tell me not to burn the candle at both ends. Tell me where to get more wax!

Anyway here's the finished product. I'll be back in a few minutes to attach the actual files.
Attachment:
Fretboard2.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Tue Mar 17, 2009 5:58 pm 
Offline
Walnut
Walnut

Joined: Mon Sep 22, 2008 11:34 pm
Posts: 10
Location: Oahu, Hawaii
First name: Nalu
Last Name: Rash
Hey Jamie! just wanted to say hello.
I also work at a sign shop and I run
a CNC router (Gerber Sabre) and
a Laser cutter (Universal Laser).
Ive been using them to make jigs and
fixtures as well as parts. Anyway, its
cool that there's someone else making
guitar parts in their sign shop. Aloha!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com