Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

interface pads

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

mikemcnerney

Post subject: interface pads

Posted: Fri Feb 09, 2024 5:01 pm

Koa

Joined: Tue Jul 22, 2008 9:34 pm
Posts: 507
Location: ottawa, ontario, ca
First name: Mike
Last Name: McNerney
City: Ottawa
State: On
Country: Ca
Focus: Build
Status: Amateur

I'm ready to start sanding 3 instruments and have watched jeff jewitt use an orbital a 3 " I think, and I will be using a 5".
He uses I think a .5" one on sides & back and nothing on the top. I already had the .5" but recently bought a .125 and a .375.
Who uses them and which size where?

_________________
Mike McNerney

Top

bcombs510

Post subject: Re: interface pads

Posted: Fri Feb 09, 2024 5:27 pm

Brazilian Rosewood

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3356
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur

I’m far from an expert so take this FWIW…

I choose the interface pad based on the grit and what I’m trying to do. This is for polyester / polyurethane - I have zero experience with nitro.

Initial leveling - 400 - hard block by hand or firm (sometimes called hard) interface pad for ROS.

Finish sanding - 600 to 1500 - soft hand block (Kovax pink foam block or yellow Assilex block) or soft interface pad for ROS.

The same for both 3” & 5” sanders.

2K & 3k - soft hand block (Kovax pink foam block or yellow Assilex block). No ROS

Brad

Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Top

bcombs510

Post subject: Re: interface pads

Posted: Tue Feb 20, 2024 2:57 pm

Brazilian Rosewood

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3356
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur

Is no-one else using interface pads?

Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Top

Page 1 of 1

[ 3 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: J De Rocher and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: