Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
Weirdness? https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=54376 |
Page 1 of 1 |
Author: | Ken Nagy [ Wed Sep 01, 2021 3:52 pm ] |
Post subject: | Weirdness? |
Ever have the Do do do do Do do do do, twilight zone days? Well maybe not THAT bad, but weird stuff? I decided to put the bronze strings on the arch top. It sounds a lot like the Stauffer with the nylons. The Stauffer might be better! So I loosened the strings, saw that it only moved up .5mm at the bridge, and went for it. I hated the hideous tailpiece, so I made a new one. I made it shorter to give the strings more spring. The tightness was what I didn't like. Weak fingers I guess, but I wasn't playing at all. The tailpiece weighs 1/2 of the other, and looks way better; at least I think so. Attachment: IMG_0541.jpg Attachment: IMG_0542.jpg Then I couldn't find the bone nut. Ok, I need a new nut anyway, the strings are thinner. But where could it have gone. The strings were kinda short, because the tailpiece was a least 1/2" shorter than before, so a couple strings weren't on the tuners when I was starting to fit the ebony nut. I have ebony. I don't have bone. I saw it fall off the guitar, and onto the floor. I looked for 10 minutes, and couldn't find it. Went upstairs, came down and it was right on the floor, where I was standing. I couldn't have missed it. So the nut is in the slot, the slots are in, the strings are still maybe a mm too high, and I bring it up to pitch. The high e keeps moving. The nylgut e on the Stauffer drops every day still, so I figure it is just the bends from being wound on the peg stretching out because it is longer now. I check to see how much it moved at the bridge. It seems like it is still something just under the 20mm it started at, and ting; the e brakes. You know what happened. The string isn't anywhere. The ball was under the tailpiece. There is a light over the head. It isn't anywhere. NO the ball isn't found, but it WAS under the tailpiece before it broke! It's just weird. |
Author: | CarlD [ Wed Sep 01, 2021 5:13 pm ] |
Post subject: | Re: Weirdness? |
I know, Ken. Sometimes I think there are gremlins in my shop ![]() ![]() ![]() |
Author: | SteveSmith [ Wed Sep 01, 2021 5:14 pm ] |
Post subject: | Re: Weirdness? |
In my experience you will find the old bone nut about the time you finish making the new bone nut ![]() I agree, the new tailpiece definitely looks nicer. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |