I built one a couple years ago using Red Spruce and I absolutely love the thing.
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Tenor Soundboard choice https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=54158 |
Page 1 of 1 |
| Author: | Cas [ Tue May 18, 2021 5:34 am ] |
| Post subject: | Tenor Soundboard choice |
Hiya, Just curious on your thoughts about choice of soundboard for a tenor guitar? I usually lean towards Swiss spruce, just because I like the clarity I think its produces over say Sitka. But i'm assuming the early Gibsons circa 1930 were all red spruce and they are some fine sounding tenors, if a little rough around the edges. The point being I guess is that with considerably less force on the soundboard, strength isn't quite such a factor. |
|
| Author: | Robbie_McD [ Tue May 18, 2021 8:17 am ] |
| Post subject: | Re: Tenor Soundboard choice |
I recently built a Tenor using Lutz spruce, thinned to about .110" Clarity is excellent, and the volume is amazingly....loud. I went for about 24 lbs of pull using a string gauge calculator, using CGDA tuning, per the customer's request. |
|
| Author: | jfmckenna [ Tue May 18, 2021 1:04 pm ] |
| Post subject: | Re: Tenor Soundboard choice |
I built one a couple years ago using Red Spruce and I absolutely love the thing.
|
|
| Author: | peter.coombe [ Wed May 19, 2021 7:17 pm ] |
| Post subject: | Re: Tenor Soundboard choice |
I use Red Spruce on mine. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|