| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Best Practices? https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49297 |
Page 1 of 1 |
| Author: | Woodie G [ Sat Apr 29, 2017 8:12 am ] |
| Post subject: | Best Practices? |
I think Mr. Schwarz's point is well made, and agrees with the views of the regulars in this shop who maintain that there are no 'best practices' - just alternative methods or tool sets to get things done. http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/voice-can-trust-100 |
|
| Author: | Colin North [ Sat Apr 29, 2017 9:29 am ] |
| Post subject: | Re: Best Practices? |
Whatever gets the pig clean... |
|
| Author: | DannyV [ Sat Apr 29, 2017 10:27 am ] |
| Post subject: | Re: Best Practices? |
Providing no blood is drawn, all is well. Although there I have been times where I have been tempted to leave a drop or two on a piece, Just so they know what went into it. Then again, there is that whole Red Violin can of worms. |
|
| Author: | Clay S. [ Sat Apr 29, 2017 4:12 pm ] |
| Post subject: | Re: Best Practices? |
"there are no 'best practices' - just alternative methods " "Alternative methods" kind of sounds like "alternative facts". Although I will agree there are no "best practices", there are certainly ways to do things that are better than others. What works best for the individual often does depend on their skill set and the tools they have on hand. I'm always interested in seeing alternative methods even if they aren't the best way for me to do it. |
|
| Author: | jfmckenna [ Sat Apr 29, 2017 6:06 pm ] |
| Post subject: | Re: Best Practices? |
I always think of best practices in terms of safety. Someone posted on Facebook the other day something like, "Is there anything I should watch out for in a new band saw?" The reply was, "the blade." So best practices are things such as work flow, dust collection, bench height, and so on. The art of wood working is all your own. Jackson Pollock thought himself to be a hack but look how far his own methods got him. At least that's always been my view on it. |
|
| Author: | Mike OMelia [ Sat Apr 29, 2017 6:12 pm ] |
| Post subject: | Re: Best Practices? |
Colin North wrote: Whatever gets the pig clean... LOL! I'll go with that 1. No drinking and cutting 2. No working tired 3. Ties, no ties in the shop (or loose clothing, DAMHIK) 4. Count all fingers before and after any cutting |
|
| Author: | klooker [ Sat Apr 29, 2017 7:15 pm ] |
| Post subject: | Re: Best Practices? |
This is sort of ironic to me. I was at a liquidation where Mr. Schwartz happened to attend also. There was literally tons of Mahogany along with other nice cabinet woods. I stumbled upon a 12/4 plank of perfectly quartersawn "Mahogany". It was at the bottom of a stack but I was able to plane a little with my block plane. I started to think it was Sapele so I asked Schwartz who happened to be nearby if he thought it was Sapele which I pronounced "Sa-pell-lee". He and his little minions chuckled at my pronunciation and replied, "yes, that's Sa-Pee-Lay". I write douche, others write doosh... |
|
| Author: | bcombs510 [ Sat Apr 29, 2017 7:45 pm ] |
| Post subject: | Re: Best Practices? |
I teach software development workshops. When asked about "Best Practices", what usually follows are what I personally have determined to be effective. Since I'm the subject matter expert in the room, all my practices are elevated to best.  Klooker, I got butchered for saying Bo-co-tay, I've heard bo-ka-tee, bo-coat, etc... Sent from my iPhone using Tapatalk |
|
| Author: | doncaparker [ Sun Apr 30, 2017 6:10 am ] |
| Post subject: | Re: Best Practices? |
Yeah, best practices tend to be the things that avoid causing harm. Do these things and you minimize the chances something bad will happen. Above that threshold, there are lots of effective ways of achieving the desired result. The attempt by some self proclaimed experts to dictate the only right way to do things says a lot about those experts and their own psychological baggage. There were arguably some virtues to the old guild system that allowed strict controls over who could engage in a craft and how they went about it, but a major downside was that the system squelched innovation. We don't have a guild system here, and I'm glad. The experts probably pout over it. This may seem like a nonsequitur, but it's not: go watch the movie Strictly Ballroom, if you can still find it. The experts in that movie proclaimed that there were to be no new steps allowed in a ballroom dancing competition. You can guess how that turned out for them. |
|
| Author: | Clay S. [ Sun Apr 30, 2017 6:34 am ] |
| Post subject: | Re: Best Practices? |
"He and his little minions chuckled at my pronunciation and replied, "yes, that's Sa-Pee-Lay"." Around here it's called Sa-Pay-Lay. I'll bet in Africa they use different pronunciations too - "alternative pronunciations"  Now the important part - did you get the board? |
|
| Author: | Woodie G [ Sun Apr 30, 2017 9:43 am ] |
| Post subject: | Re: Best Practices? |
At the recent PATINA show, there were a number of (I'll assume) skilled and knowledgeable woodworkers that took a pass on the nicely ink-lined $180 piece of 4/4 x 6' x 9" Brazilian rosewood for sale by one of the vendors. I assume they saw a stick that was too small to do much of anything with priced at $40 per BF. Mr. Verhoeven took all of 10 seconds to assess and offered $160...sold. Asked later, he saw two back and side sets,some nice head plates, and a couple bridges and fretboards that would sell for close to $4K. Same stick...lots of skilled artisans present with similar core skill sets...totally different take on worth or best use. |
|
| Author: | klooker [ Sun Apr 30, 2017 9:39 pm ] |
| Post subject: | Re: Best Practices? |
Clay S. wrote: ... Now the important part - did you get the board? No hijack intended. This was at the Midwest Woodworking liquidation in Cincinnati. I was in awe at both the equipment and wood being offered. I didn't buy that Sapele board but did buy about 50 b.f. of quartersawn 5/4 Honduran along with some old dark Brazilian rosewood - not as nice as what Herr Verhoeven found in Maryland, but I'm ok with with I got. Kevin Looker |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|