| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Texas Ebony source https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49288 |
Page 1 of 1 |
| Author: | Bill Higgs [ Wed Apr 26, 2017 11:23 am ] |
| Post subject: | Texas Ebony source |
Does anybody know of a source for Texas Ebony for fretboards? Thanks, Bill |
|
| Author: | ernie [ Wed Apr 26, 2017 2:05 pm ] |
| Post subject: | Re: Texas Ebony source |
check with savage woods .in texas near austin.There was a past thread on tx ebony might be in the archives ??? |
|
| Author: | ChuckH [ Thu Apr 27, 2017 4:31 pm ] |
| Post subject: | Re: Texas Ebony source |
Houston Hardwoods had some Texas Ebony a while back. They have a website if you want to check them out. Sent from my iPad using Tapatalk |
|
| Author: | Alex Kleon [ Thu Apr 27, 2017 8:31 pm ] |
| Post subject: | Re: Texas Ebony source |
Bill Higgs wrote: Does anybody know of a source for Texas Ebony for fretboards? Thanks, Bill You might try reposting this in the Electric Guitar forum. Dan Smith hangs out there, and I think he's used Tex Ebony for fb's. Alex |
|
| Author: | David Newton [ Sat Apr 29, 2017 11:04 pm ] |
| Post subject: | Re: Texas Ebony source |
The source that I know is "rgv-stingraymill" on ebay. He currently does not show any. I was able to get some that was suitable for fretboards one time, but my next order was trash. The seller is not interested in cutting out fretboard sized blanks, only sells rough cut log slabs. I figured for how much I was paying and how much waste there was, I could buy black Ebony boards for less. The stuff that I was able to get made for a nice fretboard, but I hated working the wood, it was nasty. |
|
| Author: | surveyor [ Mon May 01, 2017 7:05 pm ] |
| Post subject: | Re: Texas Ebony source |
Check out the pics at texaswoodcraft.net. Some of it looks big enough for fretboards. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|