| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Need some inlay work done on fretboard https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=48981 |
Page 1 of 1 |
| Author: | ChuckH [ Wed Feb 08, 2017 9:18 pm ] |
| Post subject: | Need some inlay work done on fretboard |
I read on here not long ago that a member does inlay work, but can not for the life of me remember who it is. I would like a name inlayed across the fretboard of a guitar I'm working on. Anyone have any suggestions? I did a search and my eyes got crossed and got a headache after 30 minutes. Thanks a bunch, Chuck |
|
| Author: | DennisK [ Wed Feb 08, 2017 9:45 pm ] |
| Post subject: | Re: Need some inlay work done on fretboard |
You're probably thinking of Andy Birko. |
|
| Author: | Imbler [ Wed Feb 08, 2017 10:15 pm ] |
| Post subject: | Re: Need some inlay work done on fretboard |
ChuckH wrote: I read on here not long ago that a member does inlay work, but can not for the life of me remember who it is. I would like a name inlayed across the fretboard of a guitar I'm working on. Anyone have any suggestions? I did a search and my eyes got crossed and got a headache after 30 minutes. Thanks a bunch, Chuck Craig Lavin (Clavin) also does wonderful work, Mike |
|
| Author: | ernie [ Thu Feb 09, 2017 8:57 am ] |
| Post subject: | Re: Need some inlay work done on fretboard |
.You could also try andy depaule , (oregon)who makes a lot of inlay designs for luthiers . /I/m sure they have a list of talented inlay artists who buy their designs and do commissions for other luthiers. |
|
| Author: | ChuckH [ Thu Feb 09, 2017 10:20 am ] |
| Post subject: | Re: Need some inlay work done on fretboard |
DennisK wrote: You're probably thinking of Andy Birko. Dennis.....That's it......Andy Birko Thanks so much, couldn't remember his name. Chuck |
|
| Author: | Chris Pile [ Thu Feb 09, 2017 11:01 am ] |
| Post subject: | Re: Need some inlay work done on fretboard |
Larry Ayres near Wichita is GREAT. And he's closer than Andy. |
|
| Author: | phavriluk [ Thu Feb 09, 2017 12:15 pm ] |
| Post subject: | duplicate |
duplicate |
|
| Author: | phavriluk [ Thu Feb 09, 2017 12:16 pm ] |
| Post subject: | Re: Need some inlay work done on fretboard |
If you're not hand-carrying your fretboard to the inlay folks, I suggest contacting Custom Pearl Inlay in Malone, NY. Dave Nichols, an expert's expert. |
|
| Author: | Rodger Knox [ Thu Feb 09, 2017 12:29 pm ] |
| Post subject: | Re: Need some inlay work done on fretboard |
I'll also recommend Andy and Dave, but I may do it a little cheaper, if less than the best will be good enough. I have done that kind of thing before. Attachment: IMGP3011.JPG
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|