| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Port Orford Cedar Neck Blanks https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=48979 |
Page 1 of 1 |
| Author: | Bill Higgs [ Tue Feb 07, 2017 9:05 pm ] |
| Post subject: | Port Orford Cedar Neck Blanks |
Does anyone know of a source for Port Orford Cedar neck blanks? Having a hard time finding anything. Thanks, Bill |
|
| Author: | bftobin [ Tue Feb 07, 2017 9:36 pm ] |
| Post subject: | Re: Port Orford Cedar Neck Blanks |
I believe one of our sponsors Pacific Coast Woods can help you out. If they don't have it listed, email them. Brent |
|
| Author: | meddlingfool [ Tue Feb 07, 2017 10:52 pm ] |
| Post subject: | Re: Port Orford Cedar Neck Blanks |
I recently got one from them, quite nice... |
|
| Author: | ernie [ Wed Feb 08, 2017 8:19 am ] |
| Post subject: | Re: Port Orford Cedar Neck Blanks |
Got some POC from Pacific T as well, helpful friendly service free plug for OLF advert. |
|
| Author: | George L [ Wed Feb 08, 2017 9:41 am ] |
| Post subject: | Re: Port Orford Cedar Neck Blanks |
They sell them, as does LMI. I believe Les Stansell sells POC as well. |
|
| Author: | Bill Higgs [ Wed Feb 08, 2017 5:55 pm ] |
| Post subject: | Re: Port Orford Cedar Neck Blanks |
Thanks so much guys! |
|
| Author: | truckjohn [ Wed Feb 08, 2017 10:38 pm ] |
| Post subject: | Re: Port Orford Cedar Neck Blanks |
Sounds like a very interesting wood. Probably does make a very good neck. One I often wonder about is good Douglas fir. The dense stuff runs about like maple..... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|