mike-p wrote:
I allowed twenty four hours.
That would be 18 hours in Alabama, since you are 6 hours ahead of us.
Just kidding. Thanks for the reply. 24 hours was my plan.
James
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Spraying over water slide decal https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=46048 |
Page 1 of 1 |
| Author: | guitarjtb [ Sat Jul 18, 2015 3:10 pm ] |
| Post subject: | Spraying over water slide decal |
How long should a water slide decal logo be allowed to dry before coating with nitro lacquer? |
|
| Author: | mike-p [ Sat Jul 18, 2015 3:31 pm ] |
| Post subject: | Re: Spraying over water slide decal |
I allowed twenty four hours. |
|
| Author: | guitarjtb [ Sat Jul 18, 2015 4:21 pm ] |
| Post subject: | Re: Spraying over water slide decal |
mike-p wrote: I allowed twenty four hours. That would be 18 hours in Alabama, since you are 6 hours ahead of us. Just kidding. Thanks for the reply. 24 hours was my plan. James |
|
| Author: | Josh H [ Sat Jul 18, 2015 5:27 pm ] |
| Post subject: | Re: Spraying over water slide decal |
Just did a few for a guy recently on a repair job. The instruction said 24hrs (as has already been stated). After that I proceeded with my regular finishing schedule. |
|
| Author: | guitarjtb [ Sun Jul 19, 2015 7:28 am ] |
| Post subject: | Re: Spraying over water slide decal |
Thanks, Josh and Mike. I waited, i sprayed it, and it looks great. A few more coats needed to blend it in. James |
|
| Author: | Linus [ Sun Jul 19, 2015 1:01 pm ] |
| Post subject: | Re: Spraying over water slide decal |
My experience is that the first coat you spray on should be light. I once sprayed a heavy first cost on and the decal edges lifted. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|