| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Can you tell me what these cuts are for under the top https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=45823 |
Page 1 of 1 |
| Author: | wbergman [ Tue Jun 02, 2015 6:12 pm ] |
| Post subject: | Can you tell me what these cuts are for under the top |
I hope the photo loaded. Attachment: 150513-220236.jpg
|
|
| Author: | SteveSmith [ Tue Jun 02, 2015 6:26 pm ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
hard to tell from the photo but looks like saw marks from when the top was resawn on a bandsaw. |
|
| Author: | SteveG [ Tue Jun 02, 2015 6:37 pm ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
They look like infeed roller planer marks. Taking a normal thickness cut on a planer removes these, but a really light pass or running stock a second time results in those lines. They don't look like bandsaw marks to me, but I've been wrong before...  cheers |
|
| Author: | Bobc [ Tue Jun 02, 2015 7:56 pm ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
wbergman wrote: I hope the photo loaded. Attachment: 150513-220236.jpg Do you mean what the're from? Look like band saw marks on the right. Not sure what that mess on the left is from. I've never gotten marks like that from my planer. |
|
| Author: | wbergman [ Tue Jun 02, 2015 8:14 pm ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
From or for, either one helps. I think the debris is left over from the mouse nest I couldn't get totally cleaned out. This is a very early Bay State from an estate sale. |
|
| Author: | Bobc [ Tue Jun 02, 2015 8:23 pm ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
Well it looks good from the picture. Those marks will clean up. |
|
| Author: | Alex Kleon [ Tue Jun 02, 2015 9:50 pm ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
SteveG wrote: They look like infeed roller planer marks. Taking a normal thickness cut on a planer removes these, but a really light pass or running stock a second time results in those lines. They don't look like bandsaw marks to me, but I've been wrong before... cheers +1 Alex |
|
| Author: | patch [ Wed Jun 03, 2015 1:17 am ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
SteveG wrote: They look like infeed roller planer marks. Taking a normal thickness cut on a planer removes these, but a really light pass or running stock a second time results in those lines. They don't look like bandsaw marks to me, but I've been wrong before... cheers +1 |
|
| Author: | Colin North [ Wed Jun 03, 2015 1:53 am ] |
| Post subject: | Re: Can you tell me what these cuts are for under the top |
Bobc wrote: wbergman wrote: I hope the photo loaded. Attachment: 150513-220236.jpg Do you mean what the're from? Look like band saw marks on the right. Not sure what that mess on the left is from. I've never gotten marks like that from my planer. Mess is the right word |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|