In uk please
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Where can I get a reasonably priced binding cutter for my la https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=44745 |
Page 1 of 1 |
| Author: | Cablepuller [ Sun Dec 14, 2014 3:20 pm ] |
| Post subject: | Where can I get a reasonably priced binding cutter for my la |
In uk please
|
|
| Author: | Colin North [ Sun Dec 14, 2014 4:28 pm ] |
| Post subject: | Re: Where can I get a reasonably priced binding cutter for m |
Wish I could help, but I bit the bullet and got a Stewmac set a few years ago. Added a downcut cutter when my brother visited the states last year and could bring it back. One alternative could be a bogdanovich style jig http://www.jsbguitars.com/productDetails.cfm?product=72 |
|
| Author: | Cablepuller [ Sun Dec 14, 2014 4:30 pm ] |
| Post subject: | Re: Where can I get a reasonably priced binding cutter for m |
Thanks Colin might do the same ...some things you can't cut corners on (excuse the pun) |
|
| Author: | Bob Orr [ Mon Dec 15, 2014 8:48 am ] |
| Post subject: | Re: Where can I get a reasonably priced binding cutter for m |
Try Wealdon down cut set and you can pick from a selection of bearings that you can buy individually. I have them and they work a treat. Great service and quality from this company too. Here is the link http://www.wealdentool.com/acatalog/Onl ... s_212.html Very reasonably priced too. Cheers, Bob |
|
| Author: | Cablepuller [ Mon Dec 15, 2014 1:05 pm ] |
| Post subject: | Re: Where can I get a reasonably priced binding cutter for m |
Thanks bob will check them out |
|
| Author: | mqbernardo [ Mon Dec 15, 2014 5:23 pm ] |
| Post subject: | Re: Where can I get a reasonably priced binding cutter for m |
Another vote for wealden - good price, good service and excellent quality. If you want downshear cutters you could also get whiteside from routercutter - also good prices. |
|
| Author: | murrmac [ Mon Dec 15, 2014 6:59 pm ] |
| Post subject: | Re: Where can I get a reasonably priced binding cutter for m |
Like Colin, I have the full Stewmac set , but Wealden is my go-to supplier any time I need a router bit for any other purpose. Excellent fast service. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|