Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
Satinwood https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=44295 |
Page 1 of 1 |
Author: | David Newton [ Mon Oct 06, 2014 5:06 pm ] |
Post subject: | Satinwood |
I had lost this board for a long time, I thought I might have passed it on to someone, but I've been digging deep in the wood pile, fall cleaning, and found it. It has never been cut into, but I thought I'd see how it works, bends, for binding and purfling, I think it will. ![]() It is a good-sized block, so I'll have quite a bit if it works out well. ![]() |
Author: | Colin North [ Mon Oct 06, 2014 5:11 pm ] |
Post subject: | Re: Satinwood |
Mine bent quite well, sides and binding. |
Author: | WaddyThomson [ Mon Oct 06, 2014 9:34 pm ] |
Post subject: | Re: Satinwood |
Satinwood makes great purflings. A bit yellow for bindings IMO. |
Author: | David Newton [ Mon Oct 06, 2014 10:05 pm ] |
Post subject: | Re: Satinwood |
That's so funny, I think the yellow may be right up my alley. We will see... I just finished making up bindings out of about half the block, 9 sets. |
Author: | Colin North [ Tue Oct 07, 2014 3:55 am ] |
Post subject: | Re: Satinwood |
This is one with satinwood bindings on Black Walnut B&S. Could have looked better with BWB purfling on the bottom of the bindings, I will admit. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |