He did. I've had mine for quite awhile. You'll need to contact John & see if he can hook you up.
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| OLF bracing Templates... https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=43710 |
Page 1 of 1 |
| Author: | meddlingfool [ Tue Jun 24, 2014 8:02 pm ] |
| Post subject: | OLF bracing Templates... |
Coulda swore I saw acrylic layour plates for the SJ and MJ OLF plans, but I can't find them on the Stew Mac site anywhere. Did they stop making them? |
|
| Author: | Bob Shanklin [ Wed Jun 25, 2014 12:38 am ] |
| Post subject: | Re: OLF bracing Templates... |
I just found a SM catalog from 2010. They only had brace templates for a Dred, a OOO, and a F5. They had the plans for the SJ and MJ, but no templates. Waldron carries acrylic bracing temps, but I don't know if they have the same bracing pattern as the OLF plans. Bob |
|
| Author: | meddlingfool [ Wed Jun 25, 2014 1:19 am ] |
| Post subject: | Re: OLF bracing Templates... |
Thanks... |
|
| Author: | RichB [ Thu Jul 03, 2014 1:47 am ] |
| Post subject: | Re: OLF bracing Templates... |
I have plans for the OLF SJ.... For my templates, I bought some clear Plexiglass from Tap Plastics. I have a mold I got from Bluescreek & traced the body outline onto the plastic. After that, I placed the plexiglass over the plans & did the same w/ the bracing patterns/soundhole/bridge & plate using a straightedge, compass & sharpie. I then drilled little holes in the plexiglass all along the points where the bracing ends are. Double & triple checking, making sure all lines & such matched-up w/ the plans. I had my templates.... |
|
| Author: | meddlingfool [ Thu Jul 03, 2014 4:02 am ] |
| Post subject: | Re: OLF bracing Templates... |
So Blues Creek has molds for the SJ and MJ? |
|
| Author: | RichB [ Thu Jul 03, 2014 10:45 am ] |
| Post subject: | Re: OLF bracing Templates... |
He did. I've had mine for quite awhile. You'll need to contact John & see if he can hook you up.
|
|
| Author: | meddlingfool [ Thu Jul 03, 2014 2:15 pm ] |
| Post subject: | Re: OLF bracing Templates... |
Nice walnut...l |
|
| Author: | bluescreek [ Thu Jul 03, 2014 2:18 pm ] |
| Post subject: | Re: OLF bracing Templates... |
yupper still have them |
|
| Author: | RichB [ Thu Jul 03, 2014 2:24 pm ] |
| Post subject: | Re: OLF bracing Templates... |
meddlingfool wrote: Nice walnut...l Australian Blackwood it is . . . |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|