| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| fun with rosettes https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=43098 |
Page 1 of 1 |
| Author: | bluescreek [ Sun Mar 30, 2014 4:55 pm ] |
| Post subject: | fun with rosettes |
I have a class this week and we are doing a mixed wood tile rosette. Tomorrow I will install pearl in it but the process is simple Figure out the rosette diameter , inside and outside. Select the wood and make a tapered tile. I glue them on a 1/16 substrate with a center hole. Once you have your top channel routed you can set the cutter to the outside edge then the inside edge. This gives you the ring. At this point I split it with my cutter to offset the color. Tomorrow once the glue sets I will install an inner and outer black .020 then in the center a .065 pearl ring with .010 black . They set off nicely. |
|
| Author: | DannyV [ Sun Mar 30, 2014 9:19 pm ] |
| Post subject: | Re: fun with rosettes |
Nice John! And a sexy looking top also. I have a thing for Bearclaw. Please post a photo of the finished product if you can. Cheers, Danny |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|