Todd Stock wrote:
a) gravy feed for easier, more efficient use of material,
Is it like roast beef Sunday or something.
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Looking for a new HVLP spray gun https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42684 |
Page 1 of 1 |
| Author: | RustySP [ Sun Feb 09, 2014 2:10 pm ] |
| Post subject: | Looking for a new HVLP spray gun |
As soon as my tax refund hits the bank. I have an hvlp turbine but no gun other than a tank type and will be spraying nitro and trying out some water based finishes. So, I would like to see what others are using, why they like or dislike them, and any spray cap suggestions. I just need full hvlp only, no conversion guns please and hopefully under $400. |
|
| Author: | DannyV [ Sun Feb 09, 2014 2:33 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
I'm very happy with this fellow. http://www.woodessence.com/Walcom-EGO-H ... 13C54.aspx It does everything I want it to do for instrument work including the alcohol based burst I just did. Dialled the gun down and it worked great. I use a 1.2 mm tip. Good to for you guys to be buying out of Canada. You get an extra 10 cents on the dollar. |
|
| Author: | DannyV [ Sun Feb 09, 2014 7:33 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Todd Stock wrote: a) gravy feed for easier, more efficient use of material, Is it like roast beef Sunday or something.
|
|
| Author: | RustySP [ Sun Feb 09, 2014 9:18 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Thanks Todd for that info, i'm sold and will be ordering a Fuji turbine gun. Sent from my iPhone using Tapatalk 2 |
|
| Author: | B. Howard [ Mon Feb 10, 2014 8:24 am ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
If you already have compressed air this is the best gun I have found for doing small things like guitars. http://www.devilbisseu.com/en-gb/produc ... -spray-gun |
|
| Author: | RustySP [ Mon Feb 10, 2014 8:58 am ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Thanks Howard, I do have a compressor, but it's an old leaky clunker that stalls the motor if I don't shut it down first. I've learned how to work around it's issues but a couple of years ago a friend gave me a 4 stage turbine so I built a cabinet around it and have been wanting to buy a gun for it. Looks a little like an Apollo only blue.  Sent from my iPhone using Tapatalk 2 |
|
| Author: | RustySP [ Mon Feb 10, 2014 9:45 am ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Thanks Todd, My turbine does have a bleeder port and I've attached a piece of hose to extend it outside of the cabinet and it does work. Also I bought the hoses from Phelps refinishing so I think I'm ready for a gun now. The Dear Leader says He will gift me a refund this year( yikes! did I just set myself up for an audit?). |
|
| Author: | brazil66 [ Mon Feb 10, 2014 12:32 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Using a T-75G gun right now. Wonderfull ! The support is of the best I've seen.....easy, and FAST. |
|
| Author: | RustySP [ Mon Feb 10, 2014 12:44 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Brazil 66, Your name reminded me of Sergio Mendes and his Equinox LP, one of my favorites from my youth. Sent from my iPhone using Tapatalk 2 |
|
| Author: | WaddyThomson [ Mon Feb 10, 2014 3:01 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
RustySP wrote: The Dear Leader says He will gift me a refund this year( yikes! did I just set myself up for an audit?). Yes! In addition, you can expect calls from the FBI and OSHA! |
|
| Author: | RustySP [ Mon Feb 10, 2014 3:22 pm ] |
| Post subject: | Re: Looking for a new HVLP spray gun |
Thanks Waddy, And lets not forget the EPA, NSA, and Charles-Chuck u. Schumer. Sent from my iPhone using Tapatalk 2 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|