| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| would this work for a nylon rossover combo? https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42523 |
Page 1 of 1 |
| Author: | Blake Dixon [ Thu Jan 23, 2014 2:37 pm ] |
| Post subject: | would this work for a nylon rossover combo? |
I'm thinking of building a redwood top and Walnut back and sides nylon stringed guitar. Any ideas what and if this would be a good sounding guitar? Thanks Blake. |
|
| Author: | WaddyThomson [ Thu Jan 23, 2014 4:37 pm ] |
| Post subject: | Re: would this work for a nylon rossover combo? |
Redwood is great top wood for a classical/nylon strung guitar. |
|
| Author: | Blake Dixon [ Thu Jan 23, 2014 4:50 pm ] |
| Post subject: | Re: would this work for a nylon rossover combo? |
Even this rippled stuff like in the photo above. If so waddy do you have an Idea what thickness I should be at? Thanks so much Blake |
|
| Author: | Chris Pile [ Thu Jan 23, 2014 5:08 pm ] |
| Post subject: | Re: would this work for a nylon rossover combo? |
Boy, that thing is gorgeous. |
|
| Author: | WaddyThomson [ Thu Jan 23, 2014 7:53 pm ] |
| Post subject: | Re: would this work for a nylon rossover combo? |
Thickness totally depends on the piece of wood. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|