| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Any opinions on the Martin Style Pickguards from LMI? https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42229 |
Page 1 of 1 |
| Author: | Mark Chinworth [ Wed Dec 18, 2013 3:42 pm ] |
| Post subject: | Any opinions on the Martin Style Pickguards from LMI? |
I'm thinking about using the Martin style tortoise colored pickguard (MPGTB) on my next build. Are there any opinions on this pickguard? I've used the red-colored version (MPGT) on a previous build, and it wasn't too bad. Yes, it's printed; but not nearly as obvious and pixelated as some of Martin's. If anyone has a close-up picture of the MPGTB in normal lighting, it would be greatly appreciated. |
|
| Author: | bluescreek [ Wed Dec 18, 2013 8:27 pm ] |
| Post subject: | Re: Any opinions on the Martin Style Pickguards from LMI? |
i don't use them they are a pixelated pickguard. Axion has a great pickguard that is celuloid . Looks like the vintage pickguard and is all I use |
|
| Author: | violinvic [ Wed Dec 18, 2013 9:02 pm ] |
| Post subject: | Re: Any opinions on the Martin Style Pickguards from LMI? |
I use the TorTis pickguard from LMII. They are real nice. I will check the ones that John mentioned above. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|