I use cloth-backed 80 grit Klingpor from Germany (good but pricey).
Bob
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| replacement abrasive for drum sander? https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42197 |
Page 1 of 1 |
| Author: | mqbernardo [ Sun Dec 15, 2013 6:32 pm ] |
| Post subject: | replacement abrasive for drum sander? |
Hi all, thanks for looking. What abrasive do you guys recommend for a small Jet 10-20 drum sander? i guess cloth backing should be the way to go, but that´s about all i know. thanks, Miguel. |
|
| Author: | martintaylor [ Sun Dec 15, 2013 6:37 pm ] |
| Post subject: | Re: replacement abrasive for drum sander? |
cloth backed, 60 grit would be start. I am in Australia so can't give you brand names etc but any good supplier should have it. |
|
| Author: | ernie [ Sun Dec 15, 2013 9:20 pm ] |
| Post subject: | Re: replacement abrasive for drum sander? |
I use red hill abrasives in PA. vy gud service, hi quality sandpaper /belts . You might check some euro suppliers as my 60/80 grit belts are Hermes and the other green ones come from switzerland forgot their name |
|
| Author: | unkabob [ Sun Dec 15, 2013 10:15 pm ] |
| Post subject: | Re: replacement abrasive for drum sander? |
I use cloth-backed 80 grit Klingpor from Germany (good but pricey). Bob
|
|
| Author: | Wayne Brown [ Mon Dec 16, 2013 9:28 am ] |
| Post subject: | Re: replacement abrasive for drum sander? |
I use the precut Jet rolls in 80, 120, & 180 on my 16-32. The abrasives are made by Klingspor (a German company) |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|