Todd:
could you incorporate your drying box into your dehumidifier circuit? Since you have to move the air anyway, you might as well de-gas at the same time.
Bob
| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Poly vs as nitro https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42142 |
Page 1 of 1 |
| Author: | pikolo [ Sun Dec 08, 2013 12:51 pm ] |
| Post subject: | Poly vs as nitro |
Which is better for sound?Does poly finish make a big difference in sound? |
|
| Author: | theguitarwhisperer [ Sun Dec 08, 2013 4:30 pm ] |
| Post subject: | Re: Poly vs as nitro |
So that .003 number is the thickness of typing paper, right? |
|
| Author: | Stuart Gort [ Sun Dec 08, 2013 4:32 pm ] |
| Post subject: | Re: Poly vs as nitro |
theguitarwhisperer wrote: So that .003 number is the thickness of typing paper, right? Yes...I use yellow legal paper as a reference for .003" pretty much daily. |
|
| Author: | pikolo [ Tue Dec 10, 2013 4:22 am ] |
| Post subject: | Re: Poly vs as nitro |
hm...if this is real i will switch to poly as i hate the waiting time of nitro.... |
|
| Author: | Glen H [ Tue Dec 10, 2013 9:43 am ] |
| Post subject: | Re: Poly vs as nitro |
Todd, I have some automotive clear coat. Can I use it on my instruments as-is? I build acoustics. |
|
| Author: | unkabob [ Tue Dec 10, 2013 10:35 am ] |
| Post subject: | Re: Poly vs as nitro |
Todd: could you incorporate your drying box into your dehumidifier circuit? Since you have to move the air anyway, you might as well de-gas at the same time. Bob
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|