Official Luthiers Forum!
https://www.luthiersforum.com/forum/

Need someone to CNC me a belly bridge with 1/8 slot quickly
https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37647		 Page 1 of 1
Author:  Paul Burner [ Wed Sep 05, 2012 4:32 pm ]
Post subject:  Need someone to CNC me a belly bridge with 1/8 slot quickly
I use a modified Martin belly bridge on my guitars as I'm not quite ready to make one from scratch.

I find myself in need of one in Cocobolo with a 1/8" slot and 2 1/4" string spacing.

Is there anyone out there who could quickly make me one?

I could actually provide the 2D shape that we do after we get the belly bridge, or I would be just fine with the standard size/shape.

I've checked with Don Williams - but he's too busy right now.

Thanks
Author:  Beth Mayer [ Wed Sep 05, 2012 5:14 pm ]
Post subject:  Re: Need someone to CNC me a belly bridge with 1/8 slot quickly
Paul Burner wrote:
I use a modified Martin belly bridge on my guitars as I'm not quite ready to make one from scratch.

I find myself in need of one in Cocobolo with a 1/8" slot and 2 1/4" string spacing.

Is there anyone out there who could quickly make me one?

I could actually provide the 2D shape that we do after we get the belly bridge, or I would be just fine with the standard size/shape.

I've checked with Don Williams - but he's too busy right now.

Thanks

Try to pm NY Tony, who recently posted about his cnc guy making him a bridge.
Author:  Bryan Bear [ Wed Sep 05, 2012 5:18 pm ]
Post subject:  Re: Need someone to CNC me a belly bridge with 1/8 slot quickly
That was Andy Birko, he is a member here so you should be able to find him.
Author:  Andy Birko [ Wed Sep 05, 2012 8:00 pm ]
Post subject:  Re: Need someone to CNC me a belly bridge with 1/8 slot quickly
Sent you a PM with contact info. I happen to be working on bridges right now and could turn it around fast.
Author:  Paul Burner [ Wed Sep 05, 2012 8:43 pm ]
Post subject:  Re: Need someone to CNC me a belly bridge with 1/8 slot quickly
Thanks Andy - sent you an email.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/