Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
Fret board asjustment question on my challenge build . https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37622 |
Page 1 of 1 |
Author: | WudWerkr [ Mon Sep 03, 2012 11:47 am ] |
Post subject: | Fret board asjustment question on my challenge build . |
I do have one question that I would like help on ... Notice that the bridge is closer to the back of the body and leans back a little . I wondered if I could cut off first fret , change 12th fret and bridge accordingly and have a working shorter scale . Sounds to easy, so my gut says no, that the fret spacing wouldnt be correct anymore . Please stop in and look at sitch and if you have experience , please comment ... advice needed ![]() |
Author: | Darrel Friesen [ Mon Sep 03, 2012 11:50 am ] |
Post subject: | Re: Fret board asjustment question on my challenge build . |
Fret spacing will be fine doing that. |
Author: | WudWerkr [ Mon Sep 03, 2012 1:39 pm ] |
Post subject: | Re: Fret board asjustment question on my challenge build . |
Todd Stock wrote: So understand that the body is not yet closed? If not, the move in bridge position should not be that big a deal, assuming your 12th becomes your 11th, etc. Otherwise, the shift of the bridge towards the nut could be a problem with bridge plate, etc. Adjustable ( Mandolin ) bridge and tail piece |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |