| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| Neck Fit thanks to Hesh https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=18052 |
Page 1 of 1 |
| Author: | James W B [ Sun Jul 20, 2008 7:28 pm ] |
| Post subject: | Neck Fit thanks to Hesh |
For me getting the neck joint to fit where it meets the body is one of the toughest parts of a build.So I checked the tutorials ,and sure enough my good buddy Hesh had a great toot.This turned out to be the best fit I`ve had so far.What really did the trick for me was using the self stick 120 paper attached to the body as Hesh shows in the toot. So Thanks Hesh and keep them toots coming. James W {SKIN} B |
|
| Author: | Billy T [ Mon Jul 21, 2008 2:20 am ] |
| Post subject: | Re: Neck Fit thanks to Hesh |
That's a tip I've seen mentioned a few times, but Hesh put them up so clear and detailed you can't really go wrong! Guys like Hesh make it look like anybody can do it! Big thanks to Hesh buddy! ![[clap]](./images/smilies/smiley32.gif "adulations") Hey! I wonder if Hesh would do a tut on doing tut's? 
|
|
| Author: | Hesh [ Mon Jul 21, 2008 5:50 am ] |
| Post subject: | Re: Neck Fit thanks to Hesh |
Thanks guys! 
|
|
| Author: | James W B [ Mon Jul 21, 2008 4:08 pm ] |
| Post subject: | Re: Neck Fit thanks to Hesh |
Hesh does do a great job on his toot`s Billy.I also have learned a lot from other folk`s toot`s.I just happen to be in the neck fitting stage of this build ,so this was the ticket.So let me say thanks to all the folks who have posted toot`s.This is really a valuable part of the forum for me.Everyone is very giving ,it`s truly fantastic.So everyone ,please keep Tootin`. James W B |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|