Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Neck Fit thanks to Hesh

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

James W B

Post subject: Neck Fit thanks to Hesh

Posted: Sun Jul 20, 2008 7:28 pm

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

For me getting the neck joint to fit where it meets the body is one of the toughest parts of a build.So I checked the tutorials ,and sure enough my good buddy Hesh had a great toot.This turned out to be the best fit I`ve had so far.What really did the trick for me was using the self stick 120 paper attached to the body as Hesh shows in the toot.
So Thanks Hesh and keep them toots coming.
James W {SKIN} B

_________________
James W Bolan
Nashville Tennessee

Top

Billy T

Post subject: Re: Neck Fit thanks to Hesh

Posted: Mon Jul 21, 2008 2:20 am

Brazilian Rosewood

Joined: Sun Dec 25, 2005 7:58 pm
Posts: 2946
Location: United States

That's a tip I've seen mentioned a few times, but Hesh put them up so clear and detailed you can't really go wrong! Guys like Hesh make it look like anybody can do it! Big thanks to Hesh buddy! [clap]

Hey! I wonder if Hesh would do a tut on doing tut's? laughing6-hehe

_________________
Billy Dean Thomas
Covina, CA

"Multi famam, conscientiam, pauci verentur."
(Many fear their reputation, few their conscience)

Top

Hesh

Post subject: Re: Neck Fit thanks to Hesh

Posted: Mon Jul 21, 2008 5:50 am

Old Growth Brazilian Rosewood

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13555
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional

Thanks guys!

Top

James W B

Post subject: Re: Neck Fit thanks to Hesh

Posted: Mon Jul 21, 2008 4:08 pm

Koa

Joined: Sat Jul 01, 2006 5:55 am
Posts: 1392
Location: United States
First name: James
Last Name: Bolan
City: Nashville
State: Tennessee
Country: USA

Hesh does do a great job on his toot`s Billy.I also have learned a lot from other folk`s toot`s.I just happen to be in the neck fitting stage of this build ,so this was the ticket.So let me say thanks to all the folks who have posted toot`s.This is really a valuable part of the forum for me.Everyone is very giving ,it`s truly fantastic.So everyone ,please keep Tootin`.
James W B

_________________
James W Bolan
Nashville Tennessee

Top

Page 1 of 1

[ 4 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: doncaparker and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: