| Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
| 1/4" to 1/8" router bit shank adapter- source needed https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=17575 |
Page 1 of 1 |
| Author: | gozierdt [ Wed Jun 11, 2008 8:36 pm ] |
| Post subject: | 1/4" to 1/8" router bit shank adapter- source needed |
I'm building a saddle slotting jig to use with my trim router. I need a 1/4" to 1/8" router bit shank adapter, and I haven't had any luck Googling for it. Can anybody give me a URL for a source? TIA |
|
| Author: | Heath Blair [ Wed Jun 11, 2008 8:41 pm ] |
| Post subject: | Re: 1/4" to 1/8" router bit shank adapter- source needed |
http://www.lmii.com/CartTwo/thirdproduc ... =End+Mills last item on the list. hope that works for you. im sure there are others out there, but this is the first one that came to mind. |
|
| Author: | Mike_P [ Wed Jun 11, 2008 8:47 pm ] |
| Post subject: | Re: 1/4" to 1/8" router bit shank adapter- source needed |
Lowe's sells them..probably Hell Depot also...I can't vouch for the quality, but I noticed them at Lowe's a while back... |
|
| Author: | Hesh [ Wed Jun 11, 2008 9:36 pm ] |
| Post subject: | Re: 1/4" to 1/8" router bit shank adapter- source needed |
If Lance does not see this thread PM him - he uses these adapters and has a source too I think. |
|
| Author: | David Collins [ Wed Jun 11, 2008 10:02 pm ] |
| Post subject: | Re: 1/4" to 1/8" router bit shank adapter- source needed |
I picked some up when I placed a Lee Valley order if I remember right. There are a number of places I'm sure you can find them though. |
|
| Author: | gozierdt [ Wed Jun 11, 2008 11:31 pm ] |
| Post subject: | Re: 1/4" to 1/8" router bit shank adapter- source needed |
Thanks everybody, obviously my google searches weren't finding all these sources. Biggest problem was there's no consistent name for them (bad excuse, I know...) |
|
| Author: | Peter J [ Thu Jun 12, 2008 6:19 am ] |
| Post subject: | Re: 1/4" to 1/8" router bit shank adapter- source needed |
Try this link. This is as inexpensive as you will ever find them. They have a wide selection of router bits, tools and accessories. http://www.mlcswoodworking.com/shopsite ... rings.html Regards, Peter |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|