Official Luthiers Forum! https://www.luthiersforum.com/forum/ |
|
fumed white oak https://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=17487 |
Page 1 of 1 |
Author: | Greenman [ Thu Jun 05, 2008 10:41 am ] |
Post subject: | fumed white oak |
![]() |
Author: | BruceHerrmann [ Thu Jun 05, 2008 12:40 pm ] |
Post subject: | Re: fumed white oak |
While fuming was a popular way to produce a look that the Stickley's etc wanted, there are other, less toxic ways to produce that look. I'm not aware of any properties that fuming introduced into the wood other than that aged look-(I always found it interesting that even in 1902-1918 the Arts and Crafts builders attempted to create an aged look in their furniture,so this is not a new phenomenon). I've found I can recreate that look using stains and certain pore fillers without having to deal with ammonia. I've restored several Stickley pieces and matched the White Oak quite well with these other techniques. I'd start by trying pore fillers, I've had the best luck with walnut shade filler though other shades will also help. Pore fillers have enough stain in them to allow you to accomplish a great deal with a very simple technique. Best Bruce |
Author: | Alan Carruth [ Thu Jun 05, 2008 2:01 pm ] |
Post subject: | Re: fumed white oak |
I have read that one widely used 'golden oak' stain was 'asphaltum', AKA roofing tar. Thin it out. I fumed one oak guitar I made using blueprinter's ammonia. Nasty stuff, but it did a nice job. I still practically had to give the guitar away, though. Sigh. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |