Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:52 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 1648 posts ]  Go to page Previous  1 ... 23, 24, 25, 26, 27, 28, 29 ... 66  Next
Author Message
PostPosted: Wed Jan 11, 2023 12:25 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 3384
Location: Alexandria MN
Couple of OMs going with Brazilian fretboards from wood I got from Jim Olson a long time ago

ImageIMG_8067 by Terence Kennedy, on Flickr

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.



These users thanked the author Terence Kennedy for the post (total 3): Michaeldc (Sun Feb 12, 2023 6:01 pm) • bcombs510 (Wed Jan 11, 2023 7:05 am) • Hesh (Wed Jan 11, 2023 3:14 am)
Top
 Profile  
 
PostPosted: Wed Jan 11, 2023 12:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Chris Pile wrote:
Outstanding. What finish are you shooting?



That is Candi Brandy Wine over Black Pearl with Metal Flake . Accent Parts are going to be just Black Pearl with Metal Flake

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/



These users thanked the author WudWerkr for the post (total 2): bcombs510 (Wed Jan 11, 2023 12:40 pm) • Chris Pile (Wed Jan 11, 2023 12:36 pm)
Top
 Profile  
 
PostPosted: Wed Jan 11, 2023 12:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5815
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
That is Candi Brandy Wine over Black Pearl with Metal Flake . Accent Parts are going to be just Black Pearl with Metal Flake


I meant brand and type of finish - like DuPont or acrylic lacquer.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Thu Jan 12, 2023 4:03 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 24, 2007 2:45 pm
Posts: 1332
Location: Calgary, Canada
Status: Amateur
J De Rocher wrote:
Well, today was a major brain fart day in these parts. I bend sides on a bending iron and I always start by doing the waist bend first. I was bending the second side for the current instrument. It went beautifully and fit the target shape exactly but then I realized I had done the waist bend where the upper bout bend goes. Argh! Never done that before. In my (partial) defense, the waist and upper bout bends are close together on this body shape, but still it was a total brain fart. So, I straightened it back out and did the waist bend in its correct location.

Doing the bend for the upper bout in the correct direction was actually going reasonably well until it suddenly let go at the tightest point in the bend. Bummer. I had noticed that when flattening out the side at the upper bout that the wood wasn't reverse bending evenly. It was kind of like when you bend a piece of coat hanger wire and then try to straighten it back out but it still has little kinks you can't quite get out. Bending it fully in one direction and then trying to fully reverse it just wasn't in the cards for this piece.

Sucks because the first side bent perfectly. I now have a bent orphan side and it's on to a do over with another set of sides. I'll add this one to my list of one-time (hopefully) mistakes.

Attachment:
Side fracture.jpg

That does suck. I have an orphan Cuban Mahogany side for the same reason (anyone got an extra one out there, hint hint). I haven't broken a side since I bought one of John Hall's benders and a blanket some years ago. Touch wood.


Top
 Profile  
 
PostPosted: Sun Feb 12, 2023 4:59 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball
I know this is the acoustic guitar section of the forum, but what's been going on in my shop lately is my first electric build. It is a chambered hollow body guitar, so it does have some acoustic tone to it...

Anyway, it's my take of a late 40's Paul Bigsby guitar. Shane Larson in Canada built the Bigsby style pickups (and did a great job I might add). It's a chambered sapele body with a padauk top. French polish finish. My interpretation of Paul Bigsby's face in the peghead (a good example of why a lot of tattoo artists refuse to do portraits...) Anyway, it's got that early electric guitar sound and it's a blast to play. Need to make a truss rod cover though. I'm pretty happy with it as a first try.

Dave


You do not have the required permissions to view the files attached to this post.



These users thanked the author ballbanjos for the post (total 9): joshnothing (Mon Feb 13, 2023 6:03 am) • Hesh (Mon Feb 13, 2023 2:41 am) • Durero (Sun Feb 12, 2023 7:41 pm) • J De Rocher (Sun Feb 12, 2023 6:35 pm) • Chris Pile (Sun Feb 12, 2023 6:22 pm) • jfmckenna (Sun Feb 12, 2023 6:11 pm) • SteveSmith (Sun Feb 12, 2023 6:05 pm) • Michaeldc (Sun Feb 12, 2023 6:00 pm) • bcombs510 (Sun Feb 12, 2023 5:35 pm)
Top
 Profile  
 
PostPosted: Sun Feb 12, 2023 7:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2659
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Image
After failed lacquer, sanded to bare wood and re-shot.
Working on polish, assembly soon.


Sent from my iPad using Tapatalk

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post (total 5): grantmefood (Wed Feb 15, 2023 1:04 pm) • Hesh (Mon Feb 13, 2023 2:41 am) • Chris Pile (Sun Feb 12, 2023 8:21 pm) • bcombs510 (Sun Feb 12, 2023 8:16 pm) • Michaeldc (Sun Feb 12, 2023 8:07 pm)
Top
 Profile  
 
PostPosted: Sun Feb 12, 2023 10:05 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 783
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Sweet inlay.

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/



These users thanked the author dofthesea for the post: dzsmith (Sun Feb 12, 2023 10:38 pm)
Top
 Profile  
 
PostPosted: Sun Feb 12, 2023 11:55 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3059
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
Love the Bigsby!


Top
 Profile  
 
PostPosted: Mon Feb 13, 2023 6:20 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4903
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
have a pile in the spray booth one for a well named person who built all spruce guitars.
interesting concept
I did a waterfall bubinga for a commision and a bubinga 0000 12 fret in a class also an OM my son built for a commison in Austriala pics will follow this is only first coat


You do not have the required permissions to view the files attached to this post.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it



These users thanked the author bluescreek for the post (total 4): Durero (Tue Feb 14, 2023 3:23 pm) • Michaeldc (Mon Feb 13, 2023 11:31 am) • Hesh (Mon Feb 13, 2023 11:14 am) • bcombs510 (Mon Feb 13, 2023 10:49 am)
Top
 Profile  
 
PostPosted: Mon Feb 13, 2023 8:32 am 
Offline
Walnut
Walnut

Joined: Fri Sep 03, 2021 7:44 am
Posts: 35
First name: gary
Last Name: davis
City: BILLINGS
State: Montana
Zip/Postal Code: 59105
Country: United States
Focus: Build
Status: Amateur
Fitting the back braces

ImageUntitled by Gary Davis, on Flickr



These users thanked the author Gary Davis for the post (total 3): Michaeldc (Mon Feb 13, 2023 11:31 am) • Hesh (Mon Feb 13, 2023 11:14 am) • bcombs510 (Mon Feb 13, 2023 10:49 am)
Top
 Profile  
 
PostPosted: Mon Feb 13, 2023 11:37 am 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1480
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
A new Modified Dreadnaught - Sitka over Lacewood. Been a while since I built one of these, everyone seems to want OMs and 00s.

Cheers, M

PS The fretboard is Royal Blackwood if anyone is interested in what that looks like. If you don’t know, it’s torrefied Purple Heart


You do not have the required permissions to view the files attached to this post.



These users thanked the author Michaeldc for the post (total 2): Hesh (Tue Feb 14, 2023 2:05 am) • bcombs510 (Mon Feb 13, 2023 12:13 pm)
Top
 Profile  
 
PostPosted: Mon Feb 13, 2023 12:32 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3571
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
I finally had a reason to use the shooting sander I got for Christmas. Joining up some scraps from a back plate to use as a heel cap. I used the tape method that Bob and Bryan shared at the last OLF meeting to glue it up. Worked great!

Image

Image

Image

Brad

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post (total 5): Bryan Bear (Fri Feb 17, 2023 1:47 pm) • Durero (Tue Feb 14, 2023 3:24 pm) • Hesh (Tue Feb 14, 2023 2:05 am) • doncaparker (Mon Feb 13, 2023 2:20 pm) • Michaeldc (Mon Feb 13, 2023 12:41 pm)
Top
 Profile  
 
PostPosted: Mon Feb 13, 2023 2:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 3059
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
Brad--

Is that an LED tape light stuck down in a trough, to help with candling a top/back center seam? I like it! I need one of those.



These users thanked the author doncaparker for the post: bcombs510 (Mon Feb 13, 2023 2:45 pm)
Top
 Profile  
 
PostPosted: Mon Feb 13, 2023 2:46 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3571
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
doncaparker wrote:
Brad--

Is that an LED tape light stuck down in a trough, to help with candling a top/back center seam? I like it! I need one of those.

Correct. I routed a channel, put the led strip in, and cut a small strip of acrylic to bring it back flush to the surface. Works great!

BTW - I learned that from our friend Aaron O in his ukulele video series. :)

Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post (total 2): Durero (Tue Feb 14, 2023 3:25 pm) • Michaeldc (Mon Feb 13, 2023 4:34 pm)
Top
 Profile  
 
PostPosted: Tue Feb 14, 2023 6:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5484
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
This is one in EIR using a cylindrical back with compression bracing (courtesy of Rory Dowling of Taran Guitars) and nicely silked Torrified Sitka with Poplar Burr rosette in progress.

ImageImageImage

Sent from my moto g(50) using Tapatalk

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post (total 3): rbuddy (Tue Feb 14, 2023 2:21 pm) • Michaeldc (Tue Feb 14, 2023 8:41 am) • bcombs510 (Tue Feb 14, 2023 6:43 am)
Top
 Profile  
 
PostPosted: Tue Feb 14, 2023 1:31 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 482
First name: Brian
City: U.P.
State: Michigan
Focus: Build
I've been wanting to design a new bridge and since I have 3 guitars waiting for them, I finally got around to working something up. Then figuring out how to make them and then a test run.

These are slightly over sized but reducing size/weight is pretty easy. I tried to carry something of the shape of my headstock into the bridge so it's squished down in length and stretch out in width, I'm probably the only one who would notice.

The edges facing the tail and head will be rounded over and final sanding yet to go. 2 - padauk, 2 - ebony, 1 - macasser. In the multi bridge pic, mine are on the left, right are commercial bridges.

Second pic is next to one of the headstocks.

Attachment:
DSCN4487-2.JPG


Attachment:
DSCN4488-2.JPG


You do not have the required permissions to view the files attached to this post.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post (total 5): Hesh (Wed Feb 15, 2023 2:52 am) • bcombs510 (Tue Feb 14, 2023 4:04 pm) • Durero (Tue Feb 14, 2023 3:26 pm) • Michaeldc (Tue Feb 14, 2023 2:44 pm) • Chris Pile (Tue Feb 14, 2023 2:13 pm)
Top
 Profile  
 
PostPosted: Tue Feb 14, 2023 3:07 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Brian, if I could make a suggestion. I would move the saddle slot a little closer to the top edge to aid in the ability of the bridge to rotate, which is a good thing for tone.



These users thanked the author Barry Daniels for the post: rbuddy (Tue Feb 14, 2023 4:23 pm)
Top
 Profile  
 
PostPosted: Tue Feb 14, 2023 4:00 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 482
First name: Brian
City: U.P.
State: Michigan
Focus: Build
Thanks Barry

Always open to suggestions. My limited experience, and lack of knowledge has exposed me to some variation from normal standards. Sometimes it works in my favor, sometimes more work.

One of those trips off road had the saddle a little further south and it is still a very good sounding guitar.

So I’m not too worried about it but thanks for taking the time to post.

Stringed instruments are always a compromise, sometimes we want the bridge to rotate, but we never want it to stay that way.

But it always makes it fun.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post (total 2): Hesh (Wed Feb 15, 2023 2:54 am) • Barry Daniels (Tue Feb 14, 2023 6:38 pm)
Top
 Profile  
 
PostPosted: Wed Feb 15, 2023 2:56 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13370
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Brian I like the lowered surface for the pins which will help the break angle and be very useful later in life as neck reset time approaches. As the saddle comes down to nearly nothing proud of the bridge that design element will help notes ring loud and clear.

I also like the looks of it, very cool.



These users thanked the author Hesh for the post: rbuddy (Wed Feb 15, 2023 11:55 am)
Top
 Profile  
 
PostPosted: Wed Feb 15, 2023 11:54 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 482
First name: Brian
City: U.P.
State: Michigan
Focus: Build
Colin

Thanks for the last post and especially the picture with the well made caul for inside the body bridge gluing.

I snipped out a piece of that pic to stick on the shop wall as a reminder to do that BEFORE the body is closed.

I've been known to forget that, gaah .

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post: Colin North (Thu Feb 16, 2023 8:48 am)
Top
 Profile  
 
PostPosted: Wed Feb 15, 2023 12:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2659
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Image
Eager to assemble this one.
I filed the frets down to 0.030” tall to emulate a fretless wonder.
This is a test run for the frets. If all goes well, I’ll do this on my current build.


Sent from my iPad using Tapatalk

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post (total 5): Michaeldc (Thu Feb 16, 2023 10:27 am) • Chris Ide (Wed Feb 15, 2023 9:46 pm) • bcombs510 (Wed Feb 15, 2023 6:43 pm) • Chris Pile (Wed Feb 15, 2023 5:40 pm) • Hesh (Wed Feb 15, 2023 2:03 pm)
Top
 Profile  
 
PostPosted: Wed Feb 15, 2023 6:17 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Jun 22, 2007 11:14 am
Posts: 1028
Location: Newland, North Carolina
First name: Dave
Last Name: Ball
That's definitely a looker! I like it a lot. Good luck with the frets.

Dave



These users thanked the author ballbanjos for the post: dzsmith (Thu Feb 16, 2023 9:16 am)
Top
 Profile  
 
PostPosted: Thu Feb 16, 2023 8:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5484
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
rbuddy wrote:
Colin

Thanks for the last post and especially the picture with the well made caul for inside the body bridge gluing.

I snipped out a piece of that pic to stick on the shop wall as a reminder to do that BEFORE the body is closed.

I've been known to forget that, gaah .

If it's any solace, you're not the only one who's forgotten

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Thu Feb 16, 2023 10:19 am 
Offline
Koa
Koa

Joined: Sat Mar 09, 2019 4:50 pm
Posts: 1235
Location: Goodrich, MI
First name: Ken
Last Name: Nagy
City: Goodrich
State: MI
Focus: Build
Status: Amateur
On the 3rd OLF Roundtable, I said that I dropped my cello, and broke 2 ribs, but I bought replacements, and would fix it. Brad said in the review, that I recovered.
Well, I had a recovery PLAN.
First I had to recover from the nasty head cold I got.
Yesterday I recovered.
The ribs are on. I glued them on the day before, but after gluing the lower bout, I realized I could tell it wasn't tight enough, and the joint line wasn't just right.I had to work the glued ends at the upper and lower blocks off, The upper one wasn't real tight, because I glued it after I saw it would be a two part job. So it came off fairly easy.

The lower bout was tougher. For Christmas I got a glue syringe with small tips. Forgot I even put it on my Amazonian list. I put some hot water in it, and squirted it in small seams I could work out. It didn't take that long to get it free between that and a heat gun. It was glued on pretty good.

The ribs are tapered, the belly is bigger than the back. The biggest difference is at the lower block. It has a 7 degree angle. The ribs are about 5" wide at the bottom, and the stock was about 5" wide, so I had to cut the lower end of the ribs at a large angle to get the rib to lie on the form, and cover the lower corner. Because of the way the angle is, it works easier than it looks.

My original rib stock was wider, so it was never a problem. So the recovery was more complicated.

It needs to be trimmed. The liners can be used to fine tune the outline. I tried using cardboard forms made from the back and belly; but they just got in the way.

It's warmed up to 54 down stairs. I don't stay down long. I don't pick up either. I have to get the cello out of the way.

Attachment:
IMG_1232.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Why be normal?



These users thanked the author Ken Nagy for the post (total 2): Michaeldc (Thu Feb 16, 2023 10:45 am) • bcombs510 (Thu Feb 16, 2023 10:24 am)
Top
 Profile  
 
PostPosted: Fri Feb 17, 2023 1:21 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3571
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Awesome, Ken!

I’m doing an Osmo oil finish on the neck of the walnut 00. Thanks to Michael Colbert for pointing out the Josh House videos. I’m off to the races!

Image


Image

Image


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post (total 3): Michaeldc (Sat Feb 18, 2023 8:50 am) • dzsmith (Fri Feb 17, 2023 8:07 pm) • Durero (Fri Feb 17, 2023 2:46 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1648 posts ]  Go to page Previous  1 ... 23, 24, 25, 26, 27, 28, 29 ... 66  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com