Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 9:57 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Sat Nov 21, 2020 7:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Client called and asked if I could strip the thick poly finish off the spruce top of an acoustic. My understanding is that the two options are sanding and heat. I've sanded tops before and ruined one (fortunately it was mine) so that's out for me. Not sure about using heat on an acoustic, I'd be afraid something else might come apart. My feeling right now is that I'm not going to do it but maybe I'm missing something.

Anyone else done this? Any advice (besides leave it alone :) )?

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Sat Nov 21, 2020 7:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
I've stripped a number of solid body guitars with a heat gun, but never an acoustic. On particularly recalcitrant finishes you can scorch the wood underneath before the finish lifts. Wouldn't look good on a spruce top...

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: SteveSmith (Tue Nov 24, 2020 11:10 am)
Top
 Profile  
 
PostPosted: Sat Nov 21, 2020 9:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Thanks Chris, sounds like that acoustic will be better if he leaves it alone. I'm going to pass on this one.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Sun Nov 22, 2020 10:03 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
A Carruth scraper will make quick work of that.



These users thanked the author Barry Daniels for the post: SteveSmith (Tue Nov 24, 2020 11:10 am)
Top
 Profile  
 
PostPosted: Sun Nov 22, 2020 1:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Barry Daniels wrote:
A Carruth scraper will make quick work of that.


My favorite scrapers, I was one of the first to get one when StewMac started selling them. I used them on the last two tops I stripped and I have to say the process did not go that great - both of those guitars (one EM6000, the other Royal Lac) will be getting new tops. By the time I got the tops cleaned up and ready to refinish they were thinner than I wanted. They are guitars I built so there's not a lot of extra wood on the top. I don't think the scrapers were the problem, just the mechanical finish removal process. Maybe I'm too picky idunno

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Tue Nov 24, 2020 11:02 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
I've done a couple electric guitars before too and well if I were you I would pass too! It's something I will never do again. I used a product called Aircraft Remover and it worked but it's evil too. If you do use that absolutely do it outside while wearing a gas mask.



These users thanked the author jfmckenna for the post: SteveSmith (Tue Nov 24, 2020 11:10 am)
Top
 Profile  
 
PostPosted: Tue Nov 24, 2020 11:10 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
The guitar was a Recording King 328; he wasn't looking for a new guitar but he really just liked the way it sounded. I already recommended to the guy that he would be better off if he left it alone, especially since he already really likes the sound (we had the "what changes to the top can do" conversation). He's happy now and will bring it in to get it setup.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: dbbrantley (Thu Apr 21, 2022 1:20 am)
Top
 Profile  
 
PostPosted: Tue Nov 24, 2020 1:43 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
Good call. No doubt refinishing it would change the tone.



These users thanked the author jfmckenna for the post: SteveSmith (Tue Nov 24, 2020 2:18 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com