Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:44 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Tue Jun 11, 2019 10:51 pm 
Offline
Walnut
Walnut

Joined: Tue May 28, 2019 10:42 am
Posts: 13
just started looking into building one as i am very chemically sensitive and have to have only ground hide glue and shellac to finish. this is why i'm interested in assembling and finishing it for myself. it appears some of the electrics are all screwed and bolted together. do they have kits that dont need glue? thx.


Top
 Profile  
 
PostPosted: Wed Jun 12, 2019 8:47 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Any strat or tele style guitar kit should be totally screw together. Assuming the fretboard is already attached to the neck.

Do you know that shellac contains a lot of methyl alcohol? Not exactly chemical free.



These users thanked the author Barry Daniels for the post: stebinus (Wed Jun 12, 2019 10:49 am)
Top
 Profile  
 
PostPosted: Wed Jun 12, 2019 11:12 am 
Offline
Walnut
Walnut

Joined: Tue May 28, 2019 10:42 am
Posts: 13
Barry Daniels wrote:
Any strat or tele style guitar kit should be totally screw together. Assuming the fretboard is already attached to the neck.

Do you know that shellac contains a lot of methyl alcohol? Not exactly chemical free.


thanks for the info. apparently ethyl alcohol (ethanol) can also be used which is a safe solvent.


Top
 Profile  
 
PostPosted: Wed Jun 12, 2019 12:11 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Safeish. If you are severely chemically sensitive, even ethyl alcohol may give you problems. However, once shellac is applied and cures, there should be minimal exposure. In other words, you may want to let someone else do the finishing.

Also, be aware that some wood dust can be very toxic.



These users thanked the author Barry Daniels for the post: stebinus (Wed Jun 12, 2019 4:11 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com