Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Mar 18, 2024 10:10 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 19 posts ] 
Author Message
 Post subject: Mahogany grain question
PostPosted: Mon Oct 16, 2017 6:50 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Hi fellers,
I happened across a Honduran Mahogany plank, 4/4 5" wide x 7 ft long.
It has a lovely color. I want to use it for neck blanks.
First plank I found that is not flat-sawn.

I'm wondering if I can saw my blanks parallel to the grain lines?

I figured I could cut one, plane and square it and let it sit for a week to see it it moves.
Humidity should vary from 30% to 80% the next week.
I have no clue what to expect. I paid $26 for the plank, so I'm willing to experiment.
Any comments?
Thanks,
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Mon Oct 16, 2017 8:56 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2245
Location: Seattle WA
Focus: Build
Status: Semi-pro
Sounds like you can get six neck blanks out of that piece. Scarf joint and stacked heel of course.

_________________
Pat



These users thanked the author Pmaj7 for the post: dzsmith (Wed Oct 18, 2017 9:13 am)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 7:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
That's what I've done to minimize runout.

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.



These users thanked the author klooker for the post: dzsmith (Wed Oct 18, 2017 9:14 am)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 8:02 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
If I understand you correctly you want to cut that board on an angle that is parallel to the annular rings so they do not run out the side of the neck?

IMHO you don't need to worry about that. But of course you could do it if you want. In the short distance a neck makes by the looks of that board you will be fine. You could also try splitting it to see how it goes and then cut along that edge. But it might be a waste of wood really. Mahogany id very stable. I use flat sawn for necks too. I think that myth has been debunked a long time ago. In fact in many cases flat sawn is stiffer then quartered and mahogany is very stable in all dimensions.

$26 bucks? What a deal!



These users thanked the author jfmckenna for the post (total 2): Braedyn (Sun Oct 22, 2017 2:58 am) • dzsmith (Wed Oct 18, 2017 9:14 am)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 8:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Thanks guys!
I'll give it a go. I'd prefer to cut diagonally mainly for appearance.
Dan

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 11:55 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5920
If you cut tapered blanks (2 5/8 inches to 2 inches) you could get them closer to "parallel" grained , and by nesting them end for end, maximize your yield (if you don't mind doing an internal scarf joint or gluing "ears" on your peghead).



These users thanked the author Clay S. for the post: dzsmith (Tue Oct 17, 2017 1:46 pm)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 12:15 pm 
Offline
Koa
Koa

Joined: Sat May 19, 2007 11:03 am
Posts: 1737
Location: Litchfield MI
Focus: Build
Status: Professional
I would definitely correct the grain lines ---

Ever see a high line Martin with a flat sawn neck?

For me "every instance" slab material is more prone to twists, cupping and bows --- furniture, models, home construction. Plus its easy to laminate slab into vertical grain.

_________________
Ken Cierp

http://www.kennethmichaelguitars.com/



These users thanked the author kencierp for the post: dzsmith (Tue Oct 17, 2017 1:48 pm)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 3:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I cut two blanks fairly close to the grain lines.
I think they look great.
I'll let them simmer for a few weeks.
My wife only lets me have four builds in process at the same time.
Thanks again guys!
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 4:56 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3224
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
That looks much better.



These users thanked the author Barry Daniels for the post: dzsmith (Tue Oct 17, 2017 5:26 pm)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 4:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7214
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Looks good. While I agree with jfmckenna about the overall stability, the way you cut them will make them way easier to carve with edged weapons.



These users thanked the author meddlingfool for the post: dzsmith (Tue Oct 17, 2017 5:26 pm)
Top
 Profile  
 
PostPosted: Tue Oct 17, 2017 9:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
What a beautiful site. Where did you score that plank?



These users thanked the author jfmckenna for the post: dzsmith (Wed Oct 18, 2017 9:15 am)
Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 9:12 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
jfmckenna wrote:
What a beautiful site. Where did you score that plank?

My local Woodcraft in Austin TX usually has a pile of Mahogany.
It's oxidied and is rough cut. Hard to see the grain without sanding.
Prices have ranged from $5 - $7 a board foot.
It's all 4/4 thick, but I don't mind laminating it for a body.
I found a jumbo piece wide enough for a one-piece Explorer back.
Dan


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 9:25 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
$5-7 BF is a pretty good price. Last I bought I found a guy selling on Craigs List and paid $8 BF which is about what I would get it at a near by hardwood dealer.


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 2:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2245
Location: Seattle WA
Focus: Build
Status: Semi-pro
jfmckenna wrote:
$5-7 BF is a pretty good price. Last I bought I found a guy selling on Craigs List and paid $8 BF which is about what I would get it at a near by hardwood dealer.
That is cheap! I can't ever remember it being under $10 in the Seattle area. It's typically 12 ish.

Definitely better to get it as straight as possible. I guess it depends on how high the price goes! They've been saying for ever that is going to not be available, but it seems to keep on coming. I guess it's from plantations and the color is fairly light. Not a big deal as long as it is as stable and works well.

_________________
Pat


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 3:12 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
The stuff I bought on CL was cut in the 1950's. It's all falt sawn though but it has an incredibley nice rich red color to it even after I plane the patina off of it. I got about 8 boards and one of them was highly figured. So it was quite a score :)

Image


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 3:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
Oops sorry about the HUGE picture.


Top
 Profile  
 
PostPosted: Wed Oct 18, 2017 5:53 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Mar 26, 2013 6:49 pm
Posts: 403
First name: Fred
City: Winnipeg
Country: Canada
Focus: Build
Status: Amateur
See, this is why I get depressed. Our local seller has mahogany at $20+ per board foot.



These users thanked the author printer2 for the post: Braedyn (Sun Oct 22, 2017 3:01 am)
Top
 Profile  
 
PostPosted: Wed Oct 25, 2017 9:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
After a week, my two neck blanks are straight with no sign of movement.
Thanks guys,
Dan

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Bryan Bear (Wed Oct 25, 2017 9:54 pm)
Top
 Profile  
 
PostPosted: Fri Nov 03, 2017 3:06 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 20, 2016 7:22 pm
Posts: 121
First name: Nathan
Last Name: Peirson
Country: USA
Focus: Build
Status: Amateur
Quick question for you Mahogany guys, anyone know what type of mahogany Home Depot carries? Ours carries Mahogany boards. I ran a Google search and came up with a class action suit against HD.

https://topclassactions.com/lawsuit-set ... ed-lumber/

Having grown up around Eucalyptus (that is what some are saying HD is marketing as mahogany) I've never seen any that looks like mahogany. I also read it it harder. Be interesting to see if it is a decent tonewood.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: GregHolmberg and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com