Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 31, 2024 6:08 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Sep 09, 2017 6:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
I recently bought a relatively inexpensive ($110.00) bending iron on Ebay from an 81 year old violin maker- seems like a nice fella. However, the bending iron worked for about 30 minutes. He has lifetime warranty and has already agreed to replace the heating element. After taking it apart I could tell that the heating element wasn't that great (to be expected for the price) and also the wire powering it seemed pretty small and the dimmer switch was not grounded. I'm thinking that I'll keep the replacement element as a backup and buy a higher quality one: http://www.cartridge-heater.com/eng/shop_product.php?r=13866

...as well as running a new wire with a ground and maybe adding a nicer dimmer switch since I have that stuff laying around anyway. I don't know much about wiring stuff. Anyone have any input as I've not done this before?


Top
 Profile  
 
PostPosted: Sat Sep 09, 2017 8:18 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7371
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Here's a thread were I rebuilt an Ibex bending iron and put a hotter heating element in it. Perhaps that will help.

http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=37310&hilit=ibex

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post (total 2): dpetrzelka (Sun Sep 10, 2017 11:04 pm) • James Orr (Sun Sep 10, 2017 9:29 pm)
Top
 Profile  
 
PostPosted: Sun Sep 10, 2017 8:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
The element you linked to is 160 Watts at 230 Volts. You'll only get half the watts (heat) at 110 Volt.

I don't know how much you need for a bending iron but 80 Watts seems too low.

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


Top
 Profile  
 
PostPosted: Sun Sep 10, 2017 9:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7371
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I agree 80W is too low. Not sure what the bending iron you have purchased looks like or how much metal needs to be heated. For comparisons sake, the one I put in the rebuilt Ibex was 400W and I turn it up about 60% or 70% when bending so actually using around 300W. The original was 200W I think and just didn't get hot enough.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Mon Sep 11, 2017 10:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Good call, they have so many elements that I'll have to call to find the right one.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: TimAllen and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com