Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 7:37 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 92 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
PostPosted: Sat Jun 01, 2013 11:17 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Fri Apr 13, 2012 11:21 am
Posts: 71
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Amateur
Doug, it took me a bit to find the guy's name who is also building a Tinozza, but it was Sandham Guitars: http://sandhamguitars.ca/?page_id=12

The guy was friendly. I got the impression that he's built about 4 guitars and was using this show to get a bit of attention to possibly start selling guitars as a "professional luthier". I'm sure he wouldn't mind chatting if you wanted to contact him.

Steven


Top
 Profile  
 
PostPosted: Sun Jun 02, 2013 1:29 pm 
Offline
Walnut
Walnut

Joined: Sun Jun 02, 2013 11:33 am
Posts: 3
First name: Luke
Last Name: Sandham
City: Calgary
Country: Canada
Focus: Build
Status: Amateur
Hi guys,
Just got signed on here. Thanks for the mention Steven! Bass looks fantastic, Doug. I'd love to hear it. The one I'm building has frets, a rosewood back and sides with maple insert, no cutaway, and an access port in the back. Mine's not a full 6" deep; the widest rw sides I could find were only 5 5/8; with top and back glued on finished depth will be just under 5 7/8.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sun Jun 02, 2013 1:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
LukeSandham wrote:
Hi guys,
Just got signed on here. Thanks for the mention Steven! Bass looks fantastic, Doug. I'd love to hear it. The one I'm building has frets, a rosewood back and sides with maple insert, no cutaway, and an access port in the back. Mine's not a full 6" deep; the widest rw sides I could find were only 5 5/8; with top and back glued on finished depth will be just under 5 7/8.


Cool Luke. Drop by sometime to give it a spin! I played it in a amplified band setting this morning at church and it is crazy responsive in that environment! Tends to suck up all the sound in the room...but a great characteristic for an unplugged session.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Mon Jun 03, 2013 2:05 pm 
Offline
Walnut
Walnut

Joined: Sun Jun 02, 2013 11:33 am
Posts: 3
First name: Luke
Last Name: Sandham
City: Calgary
Country: Canada
Focus: Build
Status: Amateur
Hey Doug,
Did you have trouble with feedback?
I saw earlier in your posts that you put a K & K pickup in it - how did you mount it? I'm planning to use one too. I thought I'd put it in just beside the bass-side tailblock, thinking that in playing position it might be a little easier to reach. Did you put it in before you glued the back?

Right now I'm trying to engineer how to make that access port close without using screws or other visible fasteners.

I'll email you and we can set up a time to meet. Looking forward to it.

Cheers,
Luke


Top
 Profile  
 
PostPosted: Mon Jun 03, 2013 2:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
Luke, no trouble with feedback but this beast must be kept out of direct influence from stage monitors and/or bass amp. I just need to hear myself enough to keep my intonation correct with it being fretless. I did install the K&K prior to installing the back but didn't drill the plug hole until finished. I think the pickup does justice to the intended sound. I didn't run it through a pre amp and it still provided lots of gain. My wife's skinny arm can reach all the way to the tail block from the soundhole. On a future build I would consider a sound port for the players ability to hear better. Love to connect some time.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Wed Jun 05, 2013 6:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
I have had a monster of a time trying to find a case for the large Tinozza. After a few failed attempts I landed upon a deluxe 4/4 cello gig bag from ProTec. It fits the bass like a glove! Those of you considering building a Tinozza might be interested in this little piece of information.
I should add that this was my wife's idea.
http://www.protecmusic.com/items.aspx?ProductID=516&InstrumentID=9&InstrumentGroupID=7&CategoryID=3&subCategoryID=1


You do not have the required permissions to view the files attached to this post.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Fri Jun 07, 2013 11:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build
Nice work, Doug! Congratulations.

_________________
Good judgement comes from experience. Experience comes from poor judgement.


Top
 Profile  
 
PostPosted: Sat Jun 08, 2013 7:29 am 
Offline
Walnut
Walnut

Joined: Wed Sep 05, 2012 5:52 pm
Posts: 3
First name: Michael
Last Name: Burchfield
City: Tallahassee
State: Florida
Zip/Postal Code: 32305
Country: USA
Focus: Build
Status: Semi-pro
About to rout the first flush cut on my D28 style guitar. Really afraid I've left to much over hang and terror of tear out any help about what to do know about tape on top grain should I shellac first my braces are through the sides worry they may create problem should I carve with chisel first Help please.


Top
 Profile  
 
PostPosted: Sat Jun 08, 2013 9:49 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
jointer wrote:
About to rout the first flush cut on my D28 style guitar. Really afraid I've left to much over hang and terror of tear out any help about what to do know about tape on top grain should I shellac first my braces are through the sides worry they may create problem should I carve with chisel first Help please.


I'm a newb, so take it for what it's worth, but I will use a chisel to remove any overhang I think is too much before flush routing. Just be sure and chisel out of the grain. In fact, the guy I built my first one with taught to do the whole flush trimming of the top with the chisel rather than router to avoid tearout. I use the router now, but I do have shellac on the top, and just have to take care to rout in the right directions.


Top
 Profile  
 
PostPosted: Thu Aug 01, 2013 3:58 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
So here is a little clip of the Tinozza bass being played in a coffee shop setting by professional bass musician Danny Hagan and accompanied by the equally aclaimed Mark Zielke on the keys. The song is the Miles Davis classic, "So What."
I apologize for the rough nature of the recording: done on an iPhone, in a noise coffeeshop and my phone ran out of memory therefore only half the song is recorded. Nonetheless, it does give a person an idea of the kind of tone this unique acoustic bass does produce. The bass has a K&K pickup.
I will submit a better recording for consideration in the New Builder Challenge.

http://youtu.be/Zs0ZwWg2PS0

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Wed Aug 07, 2013 6:59 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
I imagine you were grinning from ear to ear, Doug! Well done, and don't keep us waiting for some better video!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Thu Aug 08, 2013 9:55 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
Alex Kleon wrote:
I imagine you were grinning from ear to ear, Doug! Well done, and don't keep us waiting for some better video!

Alex

I sure was Alex! This guy has toured with Randy Travis as his bass player and has started to talk to me about getting a Tinozza bass built for him. I keep telling him that I need to get a bunch more builds under my belt before we go there...but it does feel good.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Last edited by Doug Balzer on Sat Nov 09, 2013 10:35 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Aug 08, 2013 10:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
Congratulations, Doug! Beautiful work.
It's great hearing someone else playing an instrument you built, isn't it!?


Top
 Profile  
 
PostPosted: Sun Nov 03, 2013 9:28 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
So here at long last, and just in the nick of time (recorded this afternoon) is the video of my 1st build. Forgive my sub-par abilities playing on a fretless bass but I think the video will, nonetheless, give you an idea of the unique sound this instrument produces. The audio from the video is pure, that is, it did not run through the K&K pick-up that is resident on the bass nor was it manipulated in any way while editing. Audio was collected from external microphones. Special thanks to my brother, Michael Haslett of Global National News, who did all the recording and editing for this video demo.

[youtube]http://youtu.be/f0iBG0ZqMPs[/youtube]

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Last edited by Doug Balzer on Mon Nov 04, 2013 2:41 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Sun Nov 03, 2013 10:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Awesome!!! [clap] [:Y:] [clap]

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker



These users thanked the author Alex Kleon for the post: Doug Balzer (Fri Nov 08, 2013 9:37 pm)
Top
 Profile  
 
PostPosted: Mon Nov 04, 2013 1:08 pm 
Offline
Walnut
Walnut

Joined: Sun Jun 02, 2013 11:33 am
Posts: 3
First name: Luke
Last Name: Sandham
City: Calgary
Country: Canada
Focus: Build
Status: Amateur
Well done, Doug.
First rate craftsmanship, even on the video itself. A beautiful instrument. I still intend to come hear it in person sometime!
Cheers,
Luke



These users thanked the author LukeSandham for the post: Doug Balzer (Fri Nov 08, 2013 9:37 pm)
Top
 Profile  
 
PostPosted: Mon Nov 04, 2013 2:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
Absolutely first rate! Well done, Doug.

I've often thought if I were to make an acoustic bass that I'd want it to be as much like an upright as possible. I'd love to hear a comparison played by someone who is both familiar with an upright and used to playing bass guitars... That would be fun!



These users thanked the author Nick Royle for the post: Doug Balzer (Fri Nov 08, 2013 9:37 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 92 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com