Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:02 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 73 posts ]  Go to page 1, 2, 3  Next
Author Message
PostPosted: Sun Apr 10, 2011 12:57 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
Much thanks to Pat Hawley and Matthias Wandel for making the plans available!

One thing that might be helpful to put in the plans is what size belt it takes. I used a 64", but would probably go with 63" instead.

I used a 3/4 horse motor, because that's all I had on hand, except for a 1-1/2 horse, which would have been overkill. ;)

Image

Image


I decided to try it out on something cheaper than rosewood, so here's a set of osage orange I thicknessed to .080":

Image

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
PostPosted: Sun Apr 10, 2011 1:53 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Sat May 22, 2010 10:32 am
Posts: 2616
First name: alan
Last Name: stassforth
City: Santa Rosa
State: ca
Zip/Postal Code: 95404
Country: usa
Focus: Build
Status: Amateur
You must be quite happy!
Good thing I've not got the room for one of those,
otherwise I'd build one.
Congrats!
Alan


Top
 Profile  
 
PostPosted: Sun Apr 10, 2011 2:10 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
How wide did you build it and what is your steel shaft diameter?

I am hoping to up-grade from fourteen inches wide to thirty inches wide to thickness a double-bass.

Bob :ugeek:


Top
 Profile  
 
PostPosted: Sun Apr 10, 2011 3:12 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
unkabob wrote:
How wide did you build it and what is your steel shaft diameter?

I am hoping to up-grade from fourteen inches wide to thirty inches wide to thickness a double-bass.

Bob :ugeek:


The drum is about 19" wide, and I used 3/4" shaft. I would have preferred 1", but I already had the 3/4" pillow bearings.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
PostPosted: Sun Apr 10, 2011 5:57 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Oct 08, 2007 2:31 am
Posts: 936
Location: Ottawa, Canada
Wow, deja-vu! Nice job Phillip. Hope it works well for you.

Pat

_________________
There are three kinds of people:

Those that make things happen,
those that watch things happen,
and those that wondered what happened.


Top
 Profile  
 
PostPosted: Sun Apr 10, 2011 10:36 pm 
Offline
Koa
Koa

Joined: Fri Mar 31, 2006 4:54 pm
Posts: 713
Location: United States
First name: nick
Last Name: fullerton
City: Vallejo
State: ca
Zip/Postal Code: 94590
Country: usa
Focus: Build
Status: Amateur
very nice and inspiring. Maybe one day soon... [:Y:]

_________________
"Preoccupation with an effect gives it power and enhances the error"
from "Your Owner's Manual" by Burt Hotchkiss.


Top
 Profile  
 
PostPosted: Sun Apr 10, 2011 11:23 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 603
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
I need to make one too. I like your wood on the tabletop. How dusty are these things to run? I suppose it depends on how much suction you have.

_________________
Jason Moe
LaCrosse WI 54601


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 9:15 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
JasonMoe wrote:
I need to make one too. I like your wood on the tabletop. How dusty are these things to run? I suppose it depends on how much suction you have.


:) The table surface is leftover laminate flooring from my bedroom. Nice to have tools that match the decor. laughing6-hehe

It's not too dusty. Here's what it looked like after sanding the osage:

http://www.pattonblades.com/41011-4.jpg

My vacuum needs a new bag, and isn't sucking that hard, so it would do even better.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 6:07 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Jul 17, 2010 11:00 am
Posts: 363
First name: Rusty
Hi Phillip,
Hey nice job on your sander. I'm wondering about the shaft, is it any special designate type of steel? All I've seen around here is some rusty weldable round rod, not very round or straight, diameters mike out all over the place, and comes in 21 ft. lengths so you can imagine how bowed up it is.
Maybe you or someone can steer me to some high quality shaft material, nice and round high rpm stuff.

Thanks,
Rusty


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 7:18 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
RustySP wrote:
Hi Phillip,
Hey nice job on your sander. I'm wondering about the shaft, is it any special designate type of steel? All I've seen around here is some rusty weldable round rod, not very round or straight, diameters mike out all over the place, and comes in 21 ft. lengths so you can imagine how bowed up it is.
Maybe you or someone can steer me to some high quality shaft material, nice and round high rpm stuff.

Thanks,
Rusty


Hi Rusty,
I used TG & P (turned, ground, and polished). Its made specifically for using as shafting, so it's made to much tighter tolerances than cold rolled or hot rolled. I got mine from Metal Supermarkets, and they were charging about $5 per foot.
I couldn't find it on their website, so you'll have to call your local store and see if they have it.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 8:13 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Jul 17, 2010 11:00 am
Posts: 363
First name: Rusty
Thanks Phillip,
Now I know what to search for.

Rusty


Top
 Profile  
 
PostPosted: Tue Apr 12, 2011 9:33 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Nice Job on the sander [:Y:] Obviously I am not seeing the entire picture here , how does the board feed and what stops the force of the sander from spitting the boards back at you . Can you show a few more pics ?

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Wed Apr 13, 2011 7:46 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Dec 27, 2009 2:59 pm
Posts: 458
Location: Northeast Indiana
First name: Phillip
Last Name: Patton
City: Yoder
State: IN
Zip/Postal Code: 46798
Country: USA
Focus: Build
Status: Amateur
WudWerkr wrote:
Nice Job on the sander [:Y:] Obviously I am not seeing the entire picture here , how does the board feed and what stops the force of the sander from spitting the boards back at you . Can you show a few more pics ?



The wood is fed in by hand, and steady pressure is what keeps you and the workpiece from becoming joined at the hip. ;)

I'm toying with an idea for a hand cranked feed conveyor which would be a nice improvement, but this still works.

I have a bunch of in-process pics of the sander in this thread:

http://www.bladeforums.com/forums/showt ... ect./page2

If you can't see them, I'll copy them here.

_________________
Regards,
Phillip Patton

http://www.pattonblades.com

The bitterness of poor quality lingers long after the sweetness of low price has faded.

https://hoosierbladesmith.wordpress.com


Top
 Profile  
 
PostPosted: Mon Mar 19, 2012 7:52 pm 
Offline
Walnut
Walnut

Joined: Sun Feb 01, 2009 11:06 pm
Posts: 1
Location: Marina, CA
First name: Duffy
Last Name: Johnson
City: Marina
State: CA
Zip/Postal Code: 93933
Country: USA
Focus: Build
Status: Semi-pro
Did you use hook and loop? if so where did you get it?

_________________
Duffy Johnson
http://www.j-r-guitar.com


Top
 Profile  
 
PostPosted: Mon Mar 19, 2012 8:17 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Dec 15, 2009 1:46 pm
Posts: 667
First name: Robert
Last Name: Renick
City: Mount Shasta
State: ca
Zip/Postal Code: 96067
Country: us
Focus: Build
Status: Amateur
basssix wrote:
Did you use hook and loop? if so where did you get it?
basssix wrote:
Did you use hook and loop? if so where did you get it?

Looks like the product that woodmaster sells, they had the best price when I looked a few weeks ago.

Nice job on the sander.
Rob

_________________
http://shastaguitar.com/
http://www.kalimbakit.com/
http://www.youtube.com/user/comfyfootgr ... ature=mhee
http://www.facebook.com/robert.renick.7


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 6:43 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Jul 24, 2005 1:53 pm
Posts: 1075
Location: United States
First name: Coe
Last Name: Franklin
City: Decatur
State: IN
Country: USA
Great job, Phillip.
You won`t regret having this tool handy.
Coe Franklin

_________________
Give me 50 cents worth of regular.
Check my oil too, if you don`t mind,,,


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 9:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
WudWerkr wrote:
Nice Job on the sander [:Y:] Obviously I am not seeing the entire picture here , how does the board feed and what stops the force of the sander from spitting the boards back at you . Can you show a few more pics ?


Wud, mine is of similar construction (manual feed). It really is more effective than you would guess feeding by hand. The trick is to feed slowly and evenly and take off small bites at a time. I positioned mine such that (unless I am doing a very small part) I stand on the side and feed in with one hand, pull out with the other. When I get to the thickness I want, I do several passes at that setting and things come out pretty darned even.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 12:23 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
I mounted mine on an old barbecue frame so that it is mobile.
I used a hip-roof on the air hood to improve air velocity over the drum.
I use sliding doors, front and back, to control air velocity entering the hood.

I like the structure of your stand, it looks solid.

Bob :ugeek:


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 1:12 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
unkabob wrote:
I mounted mine on an old barbecue frame so that it is mobile.
I used a hip-roof on the air hood to improve air velocity over the drum.
I use sliding doors, front and back, to control air velocity entering the hood.

I like the structure of your stand, it looks solid.

Bob :ugeek:


Bob - do you have any photos of your setup? Those sliding doors sound interesting.


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 7:09 pm 
Offline
Koa
Koa

Joined: Sat Nov 07, 2009 9:34 pm
Posts: 552
City: winnipeg
State: manitoba
Country: canada
Focus: Build
Status: Amateur
Charlie:
I am not tech-savy enough to post pictures.

The doors are just flat wood mounted on the front and back vertical faces. They are slotted to accept thumb-screws into tee-nuts in the face. They slide up and down on the face and are held in place by the thumb-screws.

When I start sanding, I set the doors with about an eighth inch of clearance above the wood on the feed-side and about a quarter inch on the back-side. This provides good air velocity to keep the dust in the hood at the feed but gives enough mass-flow of air to carry the dust through to the shop-vac. The slots allow adjustment for thicker or thinner wood. My sander has a maximum thickness of 0.35 inches, my new one should handle 1.5 inches I hope.

Bob :ugeek:


Top
 Profile  
 
PostPosted: Tue Mar 20, 2012 7:42 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Mar 14, 2010 12:00 pm
Posts: 2020
Location: Utah
No worries, Bob. Thanks for the description...I can picture it now. Great idea.


Top
 Profile  
 
PostPosted: Thu Mar 22, 2012 11:47 am 
Offline
Koa
Koa

Joined: Tue Jan 25, 2005 3:18 pm
Posts: 785
Location: United States
Very cool!

On the dust collection side, be very careful. A sander makes boatloads of the very fine particles that are most hazardous to your health. Your vac is doing a nice job of cutting down on the mess, but the dangerous particles are too small to be captured effectively by a vacuum. There's a big difference between suction and airflow, and airflow is what you need for the tiny particles. Until you have a good dust collection system set up, make sure to wear a good NIOSH dust mask. Keep in mind that those particles will keep floating around your shop for a long time, so opening a door to the outside and running a big fan will cut down on the amount of time you have to wear the mask after you finish sanding.


Top
 Profile  
 
PostPosted: Thu Oct 11, 2012 11:46 am 
Offline
Walnut
Walnut

Joined: Thu Oct 11, 2012 11:40 am
Posts: 18
First name: george
Last Name: seifert
State: Minnesota
Zip/Postal Code: 55126
Country: usa
Focus: Build
Status: Amateur
Hello all,

I've started building my own, but I'm wondering about how to couple the disks to the shaft. I've found at least a dozen builds on the web, but none go into any detail about that. It seems that just epoxying the disks to the shaft wouldn't be very durable.

Have you had any trouble with expansion of the disks due to humidity? Some builders recommend leaving a space between sets of disks. This seems like it could make it even harder to couple the disks to the shaft.

Any help would be greatly appreciated. Once I get over this hurdle I think I can finally get going on my drum sander and then finally on to building a guitar.

Thanks,
George


Top
 Profile  
 
PostPosted: Thu Oct 11, 2012 1:07 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
I used PU glue to glue the MDF disks together on the steel shaft. I don't remember if I roughed p the surface of the shaft or not (it was about 6 years ago). I have seen no evidence of the drum comming detached from the shaft. I suppose it could happen at any time without warning, but I doubt it.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Thu Oct 11, 2012 1:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5397
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Nice one Bryan, enjoy it.
Thanks for posting.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 73 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 59 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com