Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:41 pm


All times are UTC - 5 hours





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 21 posts ] 
Author Message
 Post subject: Indigenous tops?
PostPosted: Thu Jan 05, 2012 10:18 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Sep 28, 2011 8:16 pm
Posts: 100
First name: Adam
State: Oklahoma
Country: USA
Focus: Build
Status: Amateur
I've seen some discussion on various side materials, like several people using walnut and maple, but are there any indigenous soft woods that would be good for tops for those of us in the center of these great united states? idunno

_________________
Adam


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 10:23 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
crazicarl wrote:
I've seen some discussion on various side materials, like several people using walnut and maple, but are there any indigenous soft woods that would be good for tops for those of us in the center of these great united states? idunno

Good Question

well you have the entire united states to pull from " region " soooooooo think broader . I would have to believe there are some redwoods that would be available .. No ?

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 12:06 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Sep 28, 2011 8:16 pm
Posts: 100
First name: Adam
State: Oklahoma
Country: USA
Focus: Build
Status: Amateur
Yeah, but I'm in Oklahoma and I've been turning it over in my head since the first on what kind of "local" soft wood I could use. I mean there's poplar and doug fir, but I don't think I could find stuff the right size . . . I guess I could go plumb wild and glue several pieces of poplar together for a top . . . it would probably sound like k-rap, though. Might be better off using local plywood. laughing6-hehe

_________________
Adam


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 12:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
crazicarl wrote:
Yeah, but I'm in Oklahoma and I've been turning it over in my head since the first on what kind of "local" soft wood I could use. I mean there's poplar and doug fir, but I don't think I could find stuff the right size . . . I guess I could go plumb wild and glue several pieces of poplar together for a top . . . it would probably sound like k-rap, though. Might be better off using local plywood. laughing6-hehe




LOL well it wouldnt be a challenge ...... without a challenge ..

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 1:28 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
poplar is no good, not stiff at all and not resonant at all. i would think it would have to be a quarter inch thick to hold up under tension !
i'd say any conifer at all would be the best choice for a top, in the USA.
but seriously, i thought the "local tree species" in OK was tallgrass
:lol:


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 1:42 pm 
Offline
Koa
Koa

Joined: Tue Feb 24, 2009 9:23 am
Posts: 1372
First name: Corky
Last Name: Long
City: Mount Kisco
State: NY
Country: USA
Focus: Build
Status: Amateur
Got any local spruces?? Doug Fir will also work, though it's a bit heavy.


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 5:27 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Sep 28, 2011 8:16 pm
Posts: 100
First name: Adam
State: Oklahoma
Country: USA
Focus: Build
Status: Amateur
As far as tall grass grows, you know I was thinking about making a nice weave for the top . . . laughing6-hehe

But local spruce? I don't know. We have a lot of trees, just not a lot of big softwoods. I have a huge piece of elm, but I'm pretty sure it's only going to be good for turning. Who knows. I'll probably buy "locally" from LMI.

_________________
Adam


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Thu Jan 05, 2012 10:44 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Hmmm.... Pine, cedar, juniper, cypress, hemlock, tamarack, and fir are all good candidates.... You are likely to find them in some form or another in the hardware store.... White pine would probably work out pretty well - and you could get a piece off the side of the road when someone in town cuts down a pine tree....

How about finding a nice looking cedar post in the lumber yard - split it down the middle to verify runout... and then resaw for a multi-piece top....

You could always do a 16 piece top by resawing a flat cut 2x4.... (If you really want a picture of the 2 16 pc tops I made during my jointing practice sessions... I will post them.)

I think anything with needles on it could be made to work..... If you can't find that - how about Pawlonia - it's a fast growing tree with those giant, elephant ear leaves and pretty flowers in the spring....

Thanks


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 06, 2012 10:05 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Mar 06, 2009 6:23 pm
Posts: 416
First name: Christian
Last Name: Schmid
City: Edmonton
State: AB
Zip/Postal Code: T6E 1P9
Country: Canada
Focus: Build
Status: Amateur
How about something like the Taylor W65?

http://www.taylorguitars.com/Guitars/Archive/Older/archive/models.asp?id=w65

Softwoods for tops are overrated anyways... beehive


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 06, 2012 1:38 pm 
Offline
Koa
Koa

Joined: Sun Sep 16, 2007 1:27 pm
Posts: 705
Location: United States
First name: Dave
Last Name: Livermore
State: Minnesota
Focus: Build
Status: Semi-pro
Here's a link to all native plants of Oklahoma.
http://www.biosurvey.ou.edu/shrub/comndx.htm

Here's a link to a bunch of links to lists and info on native plants by state.
http://gardeninglaunchpad.com/native.html

You're right in that there aren't a lot of choices for native Oklahoma conifers. But you do have a cypress (bald) and a pine (Loblolly) that seem to grow more than large enough to yield a top.

I have no idea what a red cedar top would sound like, but then experimenting wouldn't be a bad thing to do either.
Someone has surely built with it before. You could search this site, find out who, and ask what it sounded like.

Good luck,

Dave


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 06, 2012 2:20 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 10, 2009 3:41 pm
Posts: 708
Location: Bothell, WA USA
First name: Jim
Last Name: Hansen
Country: USA
Focus: Build
Status: Amateur
I don't think you have to restrict yourself to your local state (although you surely can). I think this is a continent local thing, or am I mistaken? North America, South America, Europe, Asia, Australia/NZ, etc ?

Edited: Typo

_________________
Jim Hansen


Last edited by Jim_H on Fri Jan 06, 2012 3:08 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 06, 2012 2:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Jim_H wrote:
I don't think you have to restrict yourself to your local state (although you surely can). I think this is a content local thing, or am I mistaken? North America, South America, Europe, Asia, Australia/NZ, etc ?



correct ! Orig I had thought about tighter reigons , but thats to hard

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 06, 2012 3:07 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 10, 2009 3:41 pm
Posts: 708
Location: Bothell, WA USA
First name: Jim
Last Name: Hansen
Country: USA
Focus: Build
Status: Amateur
I meant to say 'contentinent' local in my last post.

Thanks for the clarification Wud

_________________
Jim Hansen


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 06, 2012 10:02 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Sep 28, 2011 8:16 pm
Posts: 100
First name: Adam
State: Oklahoma
Country: USA
Focus: Build
Status: Amateur
Yeah, I'm not too worried about it, just thinking. I mean, I would like to keep it as local as possible, but say I felled a loblolly pine that was big enough, can I use the green wood? I mean, I figure it would have to dry for . . . what a good six months and then use it only if it hasn't warped too badly.

truckjohn, I would be interested to see the 16pc top you mentioned. I wonder with that kind of lamination what it would sound like and if you could skimp a little on the bracing because of the strength of the glue joints . . . that might be something . . .

_________________
Adam


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Sat Jan 07, 2012 12:38 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Well.. I wonder too.. I really want to try them out on a guitar - just to see how it sounds... My prediction is that it would sound like a guitar... but it would probably look kinda funny because I wasn't paying attention to the direction of runout....

Even if you didn't want to use them in an instrument - they make great practice... You can get all the 2x4 scraps you want out of construction dumpsters....

Anyway - here you go!
Attachment:
Jointing practice 1.JPG

Attachment:
Jointing practice 2.JPG


Thanks


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Sat Jan 07, 2012 9:13 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
Your local 2 by 4's are better than ours. Anything around here is just a display of knots.

_________________
Jim Kirby
kirby@udel.edu


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Sun Jan 08, 2012 12:29 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Sep 28, 2011 8:16 pm
Posts: 100
First name: Adam
State: Oklahoma
Country: USA
Focus: Build
Status: Amateur
I second that Kirby. Went down to the local Lowes today and perused the woods they had. I found one piece that I hope to use, but as far as the pine and fir . . . geeze, you'd think they be selling them by the knot and not the foot.

_________________
Adam


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Sun Jan 08, 2012 1:24 am 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 603
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
Is this a one time build or a long term thing.?Going to lowes isn't local. What is your mission??

_________________
Jason Moe
LaCrosse WI 54601


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Sun Jan 08, 2012 10:36 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
You want to know what's a challenge?

Try living on one of the densest populated country in the world, with an area of West Virginia but the population of California, with absolutely NO logging or forestry industry, and little demand for wood or DIY in general.

The only wood available are only about 1" wide, and very soft and porous, from the Philippines, this is what is available from hardware stores or mom and pop lumber stores... they only cater to the 90% and not the 1%, so finding stuff for the 1% is next to impossible.

Only time I managed to get wood is from suppliers with very high turnaround time (takes about 1 month to get a quote, because the guy would take 2 weeks to answer an email) and the wood is very poor quality and expensive.

Local wood in Taiwan isn't possible unless I illegally cut down a tree in the city, or the forest and season it myself. Logging has been illegal for over 20 years here.

I can't even get mines started because I am having trouble finding wood at all. If worst comes to worst I will order some indian rosewood and just build from that, because that qualifies as indigenous from where I am at.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Sun Jan 08, 2012 2:00 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 10, 2009 3:41 pm
Posts: 708
Location: Bothell, WA USA
First name: Jim
Last Name: Hansen
Country: USA
Focus: Build
Status: Amateur
Maybe you should expand into the wood import business ? :D

_________________
Jim Hansen


Top
 Profile  
 
 Post subject: Re: Indigenous tops?
PostPosted: Fri Jan 27, 2012 6:59 am 
Offline
Walnut
Walnut

Joined: Thu Feb 18, 2010 4:09 pm
Posts: 1
First name: Jeff
Last Name: Fortenbery
City: Liberty Twp
State: OH
Zip/Postal Code: 45011
Country: USA
Focus: Build
Status: Professional
Ummm ... Your American Options include Sitka Spruce, Englemann Spruce, Adirondak Spruce, Western Red Cedar and Redwood. There may be others I'm not aware of, but these varieties cover about 95% of the guitars ever made.

Good Luck!

Jeff


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 21 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com