Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:53 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: Explorer Kit Build
PostPosted: Tue Jan 03, 2012 9:28 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Part One:
I received this as a gift from my wife for Christmas this year. This is the Guitar Fetish Explorer kit with poplar body and maple neck.
Image
This is the third Explorer I have built-up. I've also built 5 acoustics from scratch as well as 5 Bull Dog LP kits. For this one I wanted to try some things I had never done on an electric build before. My idea was to add a Flamed Maple veneer top and binding on the top edge.
Here's a look at the veneer I picked up.
Image
… and after a rough trim to size
Image

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 03, 2012 9:29 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Part Two:
Here I have one half of the veneer glued and am routing for pickups, neck pocket, etc., with a flush-trim router bit.
Image
… half-way there!
Image
Here's a shot with the veneer fully installed, routed flush and one coat of Z-poxy as a sealer coat before binding routing. I was a little worried about tear-out but had no such experience.
Image

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 03, 2012 9:30 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Part Three:
Here the binding is being installed and taped into place while the glue dries.
Image
This was also my first experience with StewMac's plastic binding which is very easy to work with.
I chose to use the blue TransTints for the top and a red mahogany on the back, sides and neck. Here the body sits after bindings are scraped free of excess stain & dye.
Image
Next was the glue and clamping of the neck.
Image
I will let this sit overnight before removing clamps and cauls.
That's it for now …. I'll be back with more soon

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 03, 2012 11:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
LOVE, LOVE, LOVE the blue!

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Wed Jan 04, 2012 8:08 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Chris Pile wrote:
LOVE, LOVE, LOVE the blue!


Thank you, Sir.

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 24, 2012 1:19 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Just got it back from my buddy who sprays my clear … really couldn't be happier!
Image
Here's a side-shot … I'm hoping to have it assembled & set-up in time for this weekend's shows … we'll see
Image
My "Gitsum" logo that I designed … I think it's funny
Image
The difference in the neck & body wood made the finish appear different on the backside … not too concerned over it though
Image

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 24, 2012 1:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
He did a good job. Are you doing anything to personalize or customize it, or just painting by numbers - as it were?

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 24, 2012 1:35 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Chris Pile wrote:
He did a good job. Are you doing anything to personalize or customize it, or just painting by numbers - as it were?


Hmmm ... not sure what you mean. Did you see I added the flame maple top, the binding & the custom headstock logo?

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 24, 2012 3:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
My bad. I remembered something about a kit, and just went with it. Call it early onset Alzheimers.....

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Tue Jan 24, 2012 3:51 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Chris Pile wrote:
My bad. I remembered something about a kit, and just went with it. Call it early onset Alzheimers.....


HaHa ... No problem!
This has been fun ...

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Thu Jan 26, 2012 10:59 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
About ready for a test run!
Image
Setup is done, can't wait to try it out this weekend.
Image
Image
Overall I'm pretty happy with this project. It was not without a few minor setbacks, but I suppose that's how I progress.
Image

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Thu Jan 26, 2012 11:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Oct 12, 2010 9:01 pm
Posts: 3031
First name: Tony
Last Name: C
City: Brooklyn
State: NY
Focus: Build
Status: Amateur
Great job! Love the veneer!

_________________
http://www.CostaGuitars.com
PMoMC


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Thu Jan 26, 2012 11:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Apr 02, 2010 10:35 pm
Posts: 2561
Country: USA
Focus: Repair
Status: Professional
Can't argue with that. Great job!

_________________
Old growth, shmold growth!


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Fri Jan 27, 2012 12:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
I'd be proud to own it.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Fri Jan 27, 2012 12:28 am 
Offline
Koa
Koa

Joined: Sun Oct 28, 2007 4:40 pm
Posts: 763
Location: United States
Man that looks great! Nice job.

mike

_________________
Mike Lindstrom


Top
 Profile  
 
 Post subject: Re: Explorer Kit Build
PostPosted: Fri Jan 27, 2012 8:10 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Apr 26, 2006 1:56 pm
Posts: 412
Location: North Muskegon, MI
Country: USA
Focus: Build
Status: Amateur
Thanks. I'm pretty pleased with it. There's a few things I'd like a do-over on, but happy for the most part.

_________________
Christopher C. Cordle
North Muskegon, MI

http://www.yardsaleunderwear.com
http://www.facebook.com/christopher.cordle


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 19 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com