Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:59 pm


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Bracing need / purpose
PostPosted: Sun Jul 10, 2011 3:33 pm 
Offline
Walnut
Walnut

Joined: Tue Mar 08, 2011 1:44 pm
Posts: 8
First name: Kevin
Last Name: B
Focus: Build
Status: Amateur
Hypothetically speaking, if you use a solid one-piece (no bookmatching or otherwise split in half) with a fairly stiff wood on an acoustic, would you necessarily need bracing on the back?

I imagine there might be some concern about the back warping and whatnot, but since it does not have the stress directly from the bridge that the top has, would bracing really be necessary? Have you witnessed any guitars that tried using minimal or no bracing on the back?

I know it would not be advisable, but I was just kinda curious.


Top
 Profile  
 
PostPosted: Mon Jul 11, 2011 2:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Back are almost always domed - it would be very difficult to do that without braces. Wood expands and contracts with temperature and humidity - an unbraced back would probably split (which is why most backs are simply ladder braced with the center seam reinforcement.

Finding a prefectly quartered piece of wood wide enough to built a back out of is almost impossible too, but you have assumed that out of the equation.

However, thick carved backs (some archtops, mandos, etc) are frequently not braced.


Top
 Profile  
 
PostPosted: Mon Jul 11, 2011 3:46 pm 
Offline
Walnut
Walnut

Joined: Tue Mar 08, 2011 1:44 pm
Posts: 8
First name: Kevin
Last Name: B
Focus: Build
Status: Amateur
Thanks, that's what I was guessing. The only archtop I've played I believe had back bracing despite its thickness, which got me thinking.

I believe most (if not all) Ovations and similarly synthetic back guitars do not have bracing... which got me thinking more.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com