Official Luthiers Forum! • View topic

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Ivroid Source

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

NWflyonly

Post subject: Ivroid Source

Posted: Mon Feb 08, 2010 10:34 pm

Contributing Member

Joined: Fri Apr 03, 2009 2:46 pm
Posts: 243
First name: Mark
Last Name: Morris
City: Sedona
State: AZ
Zip/Postal Code: 86339
Country: USA
Focus: Build
Status: Amateur

I'm looking for an ivroid source that doesn't charge a $25 hazmat handling fee? Is there anything out there? It would be one thing if they actually did something different in their shipping but it's shipped the same as non-hazardous. It just seems like a scam.

Top

Mark Maquillan

Post subject: Re: Ivroid Source

Posted: Mon Feb 08, 2010 10:48 pm

Contributing Member

Joined: Tue Apr 17, 2007 3:50 am
Posts: 305
Location: Central Washington United States

Allied has binding but thats all. You can get it from Martin but it is not as wide as Allied's and they have the heel cap and end wedge. Just went through all this just a few weeks ago. The Allied stuff is good because it is long enough to go all the way around the body.

_________________
Wisdom is justified by her children

Top

Timcacca

Post subject: Re: Ivroid Source

Posted: Tue Feb 09, 2010 4:53 am

Mahogany

Joined: Sat Dec 12, 2009 3:33 am
Posts: 57
First name: Tim
Last Name: Caccamise
City: Moreno Valley
State: CA
Zip/Postal Code: 92557
Country: USA
Focus: Build
Status: Amateur

Just got mine from Martin today, the end wedge is not very wide so be aware. If you don't need a heel cap and end wedge then maybe go with Allied. My issue was the color, LMI was quite yellow IMO, Martin's is a little more on the creamy side, but still darker than the Iveroid pegs on the Waverlys I will be using.

Tim

Top

Laurent Brondel

Post subject: Re: Ivroid Source

Posted: Tue Feb 09, 2010 6:36 am

Contributing Member

Joined: Wed Aug 31, 2005 7:30 am
Posts: 1792
Location: United States

Martin, AllParts.

_________________
Laurent Brondel
West Paris, Maine - USA
http://www.laurentbrondel.com/

Top

bluescreek

Post subject: Re: Ivroid Source

Posted: Tue Feb 09, 2010 9:35 am

Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4915
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional

Martin does have 3/16 and 1/4 inch ivroid binding , grizzly also has it and it is 62 inches long

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it

Top

Shane Neifer

Post subject: Re: Ivroid Source

Posted: Tue Feb 09, 2010 12:55 pm

Brazilian Rosewood

Joined: Thu Aug 04, 2005 7:50 am
Posts: 3152
Location: Canada

I have it in bindings only, double length so one peice goes all the way around the guitar.

Shane

_________________
Canada

Top

Page 1 of 1

[ 6 posts ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: