Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:19 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 97 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
PostPosted: Thu Jun 26, 2008 3:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2335
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
David,

This is very interesting to me. Thanks for posting it.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
PostPosted: Thu Jun 26, 2008 4:40 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
David - Why is the back center strip needed? Do you have a sense that it is structural?

Jim

_________________
Jim Kirby
kirby@udel.edu


Top
 Profile  
 
PostPosted: Thu Jun 26, 2008 6:51 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Yes Jim I think so.
The original has this and I'll include it in order to be as faithful as I can to the original design.
The cardboard has the same stiffness in all directions thus the usual extra strength one would have along the grain of the back is not there.
I think this is what was behind the thicker and stiffer back reinforcement strip.


Top
 Profile  
 
PostPosted: Thu Jun 26, 2008 11:42 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Top bracing is now complete.
Attachment:
CardboardTorresVI 001.jpg

Attachment:
CardboardTorresVI 003.jpg

The unusual cut off braces (as far as I know) are unique on a Torres guitar.........these would make more sense if they were a later addition.
Attachment:
CardboardTorresVI 004.jpg

The rosette installed.
Attachment:
CardboardTorresVI 002.jpg

The first step in "free assembly" is to align and glue the neck to the top as well as the end block.
Attachment:
CardboardTorresVI 005.jpg

Attachment:
CardboardTorresVI 006.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Jun 27, 2008 5:54 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
David LaPlante wrote:
Yes Jim I think so.
The original has this and I'll include it in order to be as faithful as I can to the original design.
The cardboard has the same stiffness in all directions thus the usual extra strength one would have along the grain of the back is not there.
I think this is what was behind the thicker and stiffer back reinforcement strip.


Aside from the question of historical accuracy, it looks like a very good candidate for an X-braced back, to pick up the extra stiffness along the back.

Jim

_________________
Jim Kirby
kirby@udel.edu


Top
 Profile  
 
PostPosted: Fri Jun 27, 2008 2:00 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Continuing with the "free assembly process"
The sides are aligned with the penciled tracing of the pattern on the inside of the top and glued to the neck and end blocks.
Attachment:
CardboardTorresVII 001.jpg

No glue is used along the edges where the sides meet the top, glue blocks (peonies) are installed to attach it at this juncture.
Attachment:
CardboardTorresVII 003.jpg

Attachment:
CardboardTorresVII 004.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Jun 27, 2008 8:12 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Here is the rather stiff center support being glued that Jim Kirby and I were discussing. It's about twice as thick as a normal one and the grain is longitudinal so it adds a lot of support to the back.
Attachment:
CardboardTorresVII 002.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Jun 28, 2008 2:00 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
One observation to share is that the more complete the structure gets, the closer it feels to being made of regular materials. I expect that it will feel and weigh what a typical guitar would.
Attachment:
CardboardTorresVIII 001.jpg

Attachment:
CardboardTorresVIII 004.jpg

The reinforcement strip shown previously has stiffened the back plate up nicely. Here is the bracing being glued.
Attachment:
CardboardTorresVIII 003.jpg

I'm notching the bracing over the strip to maintain as much support as possible.
Attachment:
CardboardTorresVIII 002.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Jun 28, 2008 3:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sat Jun 17, 2006 3:48 am
Posts: 2094
Thank you for the updates, this is a very informative thread!


Top
 Profile  
 
PostPosted: Sat Jun 28, 2008 5:54 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Mar 22, 2007 10:59 pm
Posts: 2103
Location: Bucharest, Romania
Country: Romania
Focus: Build
Status: Professional
Funny that when I was reading the initial discussion on the back cedar strips, I was thinking that if I was to build a cardboard guitar I would use a pair of solid cedar strips (mimicking a 3 piece back) and notch the spruce bars over. Then i decided not to post it because well, it wasn't me building :)

_________________
Build log


Top
 Profile  
 
PostPosted: Sat Jun 28, 2008 6:53 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Alex, according to Joan Pellise' there are actually three in the original. However, Joshua French observed that the outer two are later additions. I've just put the main center one in as I used a slightly heavier board. I also could see its shape in the photos.


Top
 Profile  
 
PostPosted: Sat Jun 28, 2008 9:01 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue Nov 29, 2005 11:44 am
Posts: 2186
Location: Newark, DE
First name: Jim
Last Name: Kirby
Focus: Build
Status: Amateur
This is starting to get really compelling. I can't think of any vaguely interested person who wouldn't be astounded if you pulled one of these out to show to them. I know the original sounds good, and can't wait to see how your does. A similar one may be next on the list here.

Thanks for all the discussion of the back brace.

_________________
Jim Kirby
kirby@udel.edu


Top
 Profile  
 
PostPosted: Sun Jun 29, 2008 12:41 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
The linings are now in (kerfed Spruce) as well as the "long" rib blocks to support the harmonic bars.
Attachment:
CardboardTorresIX 001.jpg

The back is ready to be fitted and glued. The back braces will also get shorter "rib blocks".
Attachment:
CardboardTorresIX 002.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sun Jun 29, 2008 2:30 pm 
Offline
Walnut
Walnut

Joined: Mon Jun 16, 2008 10:01 am
Posts: 1
This is quite exciting. :D

I'm looking forward to the finished results.


Top
 Profile  
 
PostPosted: Sun Jun 29, 2008 10:00 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Jul 04, 2007 5:07 pm
Posts: 206
Location: Singapore
First name: Sen
Last Name: Goh
Country: Singapore
Focus: Build
Status: Amateur
Hi David,

This is definitely getting more and more interesting and exciting.
I have one question regarding the stiffness of the sides.
(Before and after closing)
Would it be able to withstand the weight of the player's arm resting on the lower bout?
Is there any deformation of any sort?

Sen

_________________
-----
Sen CL Goh
http://senguitar.blogspot.com


Top
 Profile  
 
PostPosted: Mon Jun 30, 2008 10:59 am 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
No problem in that regard. I've used a somewhat thicker material for the rims than on the original. As a result, I've left out the later added reinforcements and have a nice resilient structure.
Here is the back being glued.
Attachment:
CardboardTorresX.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Mon Jun 30, 2008 12:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 05, 2005 3:45 pm
Posts: 4337
Location: United States
Ooooh, ^ that would make me a bit nervous!

Looking great David.
Many thanks!

Steve

_________________
From Nacogdoches...the oldest town in Texas.

http://www.stephenkinnaird.com


Top
 Profile  
 
PostPosted: Mon Jun 30, 2008 12:31 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Jul 05, 2005 10:53 pm
Posts: 2198
Location: Hughenden Valley, England
David,

This is a fascinating project that I am really enjoying following and I will be interested to see how it plays and sounds when finished.

Is this one where a future repair could be "papering over the cracks"? Sorry . . . I couldn't resist that one.

_________________
Dave White
De Faoite Stringed Instruments
". . . the one thing a machine just can't do is give you character and personalities and sometimes that comes with flaws, but it always comes with humanity" Monty Don talking about hand weaving, "Mastercrafts", Weaving, BBC March 2010


Top
 Profile  
 
PostPosted: Mon Jun 30, 2008 1:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Dave, this is the one that you just crumple up and toss in the recycle bin if you don't like the sound! :D

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
PostPosted: Mon Jun 30, 2008 2:03 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
OK, Out of the clamps, flush trimmed (I went to the store and picked up a new Freud bit to get the cleanest cut I could) and cut for bindings.
Attachment:
CardboardTorresXI 001.jpg

Attachment:
CardboardTorresXI 002.jpg


A relatively new bit from LMI produced pretty clean results. I had to be careful to "back in" to the cut all the way around as the cardboard will tend to deflect and bunch up in front of the bit.
Attachment:
CardboardTorresXI 003.jpg

Attachment:
CardboardTorresXI 004.jpg


At this point, the less I try to fool with the surface the better. I've pre sanded my rosewood bindings and beside a little rounding over at the edge, I'll pretty much
have to live with the fit I get out of the gate. The top can be handled in the usual way, but the back and sides
will have to forego any scraping or sanding.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Tue Jul 01, 2008 8:08 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Back Bindings are now in.
Attachment:
CardboardTorresXII 003.jpg

Attachment:
CardboardTorresXII 004.jpg

The preliminary carving of the heel has been done plus the fret board and bridge are under way.
Attachment:
CardboardTorresXII 002.jpg

Next, the top binding and purflings go in.
Attachment:
CardboardTorresXII 001.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Jul 02, 2008 4:24 pm 
Offline
Mahogany
Mahogany

Joined: Sun Jun 29, 2008 6:36 pm
Posts: 58
Mike Collins wrote:
Dave ;
is that Brazilian poster board? oops_sign

No, Mike, it's obviously Manila. ;)

Interesting project, Dave. Strange....but interesting. I admire your sense of adventure! [:Y:]

_________________
Carlton Macksam
Muskegon, Michigan


Top
 Profile  
 
PostPosted: Wed Jul 02, 2008 4:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2335
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
Carlton!!! Great to see you here again!!!!

Pat

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
PostPosted: Wed Jul 02, 2008 4:41 pm 
Offline
Cocobolo
Cocobolo

Joined: Mon May 05, 2008 3:58 pm
Posts: 429
Location: Cottonwood, California USA
First name: Darrin
Last Name: Oilar
City: Cottonwood
State: CA
Zip/Postal Code: 96022
Focus: Build
I can remember as a kid telling my dad that I could easily build a guitar. I remember having this image of a shoe box, with a wrapping paper roll stuck in one end and some strings across the whole thing. Now I know i was wrong to go with the wrapping paper tube. :D

Seriously, this is a fascinating thread. I can't believe how fast you work though. Sheesh. Something tells me this isn't your first rodeo.

Darrin


Top
 Profile  
 
PostPosted: Thu Jul 03, 2008 12:17 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jan 25, 2008 9:51 pm
Posts: 1134
Location: Albany NY
First name: David
Last Name: LaPlante
Status: Professional
Here is the top binding in with the cloth tape wrapped to secure it as the glue (fish) dries.
Attachment:
CardboardTorresXIII 001.jpg

Now trimmed flush with the surface of the top. As this point I can evaluate whether I got the plantilla right.
Attachment:
CardboardTorresXIII 003.jpg


Detail of the binding and rosette.
Attachment:
CardboardTorresXIII 002.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 97 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: DennisK, nashrb and 35 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com