Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:43 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Making a Guitar Mold
PostPosted: Fri Dec 23, 2016 3:19 pm 
Offline
Mahogany
Mahogany

Joined: Wed May 14, 2014 8:03 pm
Posts: 59
Location: Reading, PA
First name: Eric
Last Name: Schaefer
City: Bernville
State: PA
Zip/Postal Code: 19506
Country: US
Focus: Build
Status: Professional

_________________
http://www.ericschaeferguitars.com


Top
 Profile  
 
 Post subject: Re: Making a Guitar Mold
PostPosted: Sun Dec 25, 2016 11:41 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Thanks for posting this. I found that my 1st 3 rounds of making forms were pretty painful... The various slices weren't really the same shape and it took a lot of sanding on the spindle sander to sort it back out... Then - the mold didn't really match the template all that well and wasn't really symmetrical.

Subsequently - I saw your method and it went a lot faster and was a lot more precise.

One suggestion. Rout the 1st layer of the stack from your template. Then glue and screw the next slice to that. Rout it to match. Glue and screw the next layer onto that one.. Then rout to match. Viola - completed mold half... You never have to take it back apart and re-align all the slices when you disassemble, glue, and reassemble.

To make the 2nd side - screw the 4th slice to your 1st side just like before except no glue. Rout, unscrew, and you now have your 1st piece for the 2nd side. Repeat the process of gluing, screwing, and routing 2 more pieces till done.

Then - assemble exactly like you did.


Top
 Profile  
 
 Post subject: Re: Making a Guitar Mold
PostPosted: Mon Dec 26, 2016 2:11 pm 
Offline
Mahogany
Mahogany

Joined: Wed May 14, 2014 8:03 pm
Posts: 59
Location: Reading, PA
First name: Eric
Last Name: Schaefer
City: Bernville
State: PA
Zip/Postal Code: 19506
Country: US
Focus: Build
Status: Professional
That is also a fine way of doing it. Thanks John!

_________________
http://www.ericschaeferguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com