Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Mar 18, 2024 9:36 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 112 posts ]  Go to page 1, 2, 3, 4, 5  Next
Author Message
PostPosted: Sat Jun 11, 2016 7:58 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
My guitar will be a parlor guitar in its dimensions, but will have a shape I came up with that's different from the traditional shape.

Something old: For the old scrap or scrounged part, I'll be using a block of lignum vitae I inherited from my wife's grandfather via her mother who gave it to me thinking I might want to use it in a guitar. He was a marine engineer in one of the ship yards here in Seattle almost a hundred years ago. Lignum vitae had a number of uses in ship components and he had saved a block of it. I'm thinking of using it for the head plate, and possibly the end graft. For another "something old component", although not scrap or scrounged exactly, I'm going to try my hand at inlaying ammonite fossils (more than 65 million years old) into the fretboard as fret markers. Credit for the idea goes to forum member Patch Rubin who has done this on his guitars.

Something new: This will be my first parlor guitar, my first use of reversed kerfed lining, and my first maple neck. I also have an idea for a modern take on a slotted headstock, but I'll have to try making a mockup first to see if I can make it will work.

Something local: The main woods have a West Coast US theme. Redwood from northern California for the top, Claro walnut from southern Oregon for the back and sides, and big leaf maple from Washington for the neck.

For the "choose two" part, I'll be building a parlor under the price cap.

Specs:
Top: Redwood
Back & Sides: Claro Walnut
Neck: Big Leaf Maple
Binding: Bloodwood
Fretboard: Indian Ebony
Headplate: Lignum Vitae

Lower Bout: 13"
Waist" 7.5"
Upper Bout: 9"
Length: 18"
Depth 3.5-4.0"
Scale Length: 24.75"


I haven't decided what to do for purfling or the rosette design yet. I like the idea of making a rosette from spruce bark like the one Grant Goltz showed in this thread: http://luthiercom.org/phpBB3/viewtopic.php?f=71&t=3384. If I can scrounge a suitable chunk of spruce or maybe Ponderosa pine bark, I'll give it a shot.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sat Jun 11, 2016 8:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I drew up the body shape in the G-Thang design program a couple weeks ago and got it printed out and then turned it into a template. I finished making the body form last week.

Attachment:
1 Parlor guitar template.jpg

Attachment:
2 Parlor body mold.jpg


The major materials:

Attachment:
3 Parlor guitar materials.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sat Jun 11, 2016 10:18 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
That's some pretty Claro! I like the shape too!

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.



These users thanked the author Bryan Bear for the post: J De Rocher (Mon Jun 13, 2016 11:46 pm)
Top
 Profile  
 
PostPosted: Mon Jun 13, 2016 11:53 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I got some sides-related stuff done over the past few days. Bending this claro walnut went really easy. Now I'm ready to drive the bus.

Attachment:
4 Side profiles rough cut.jpg

Attachment:
5 Bending a side.jpg

Attachment:
6 Sides bent and fit to mold.jpg

Attachment:
7 Gluing tail block.jpg

Attachment:
8 Neck block ready to go.jpg

Attachment:
9 Gluing in neck block.jpg

Attachment:
10 Ready to drive the bus.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Tue Jun 14, 2016 12:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3551
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
Sometimes I wonder why I ever build with anything other than walnut :D



These users thanked the author DennisK for the post: TW Eelty (Mon Dec 19, 2016 3:53 pm)
Top
 Profile  
 
PostPosted: Tue Jun 14, 2016 9:41 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
Wow, driving the bus already! Looking good. At this rate, this thing will already be played in by the time winter sets in.

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Tue Jun 14, 2016 11:53 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I'm trying to make some quick progress now while the finish on another guitar is curing. This guitar will have to get set aside starting next week while I do the final assembly of the other one.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Tue Jun 14, 2016 3:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I really like that walnut. Gonna make a pretty guitar!

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Wed Jun 15, 2016 7:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I drove the bus yesterday and then pre-bent the reverse kerfed lining the way that Ken Cierpilowski shows on his web site by wetting the webbing side with water, clamping it to the outside of the rims, and then letting it dry in place. Worked great. I got the linings installed today. I had read that the reverse linings make the sides more rigid, but I was shocked, shocked I tell you, at just how solid the sides are with these linings. I like it.

Attachment:
11 Driving the bus.jpg

Attachment:
12 Pre-bending reverse kerfed lining.jpg

Attachment:
13 Pre-bending reverse kerfed lining.jpg

Attachment:
14 Installing lining.jpg

Attachment:
14 Reverse kerfed lining installed.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sun Jun 26, 2016 7:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I have some progress to add. I got the top and back plates joined, and the braces made and ready to go for gluing when I have time.

I also started playing around with hunks of bark gathered from fallen trees in local woods to see if I can use it to make a rosette ring. Some barks reveal pretty cool patterns when sanded. So far, I've tried Douglas fir, hemlock, and cottonwood. I flattened them by steaming with a laundry iron and then pressing under weights. I killed our 15+ year-old iron in the process. I then ran them through the thickness sander. The main problem with these three species is that the bark has deep fissures making it impossible to get a large enough sanded area to make an entire ring as one piece. A segmented rosette would probably be the way to go. All three make some interesting patterns that are characteristic of each tree as far as I can tell, but they are also quite variable from one hunk of bark to another.

Attachment:
15 Joining top plates.jpg

Attachment:
16 Joining back plates.jpg

Attachment:
17 Braces prepared.jpg

Attachment:
18 Hunks of bark for rosette experiments.jpg

Attachment:
19 Douglas fir bark after sanding.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sat Jul 09, 2016 1:07 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
I really like the way reversed kerfed linings stiffen up the sides, and solid laminated linings work even better, at least until the plates go on.
I hope you can make some of that bark work as inlay, it's unique.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Mon Aug 15, 2016 1:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Now that another guitar I was working on is finished, I finally have some progress to report.

I picked up where I left off seeing if I can make a rosette ring from bark. Since this guitar is going to end up belonging to my daughter, it occurred to me that I might be able to make the rosette a sort of memento for her. She has been going to a summer camp in South Puget Sound ever since she was 8 years old (now 21) and has spent the last three summers off from college working as a councilor at the camp. It's a very special place for her so I asked her to scavenge in the woods at camp, which there are lots of, for any big chunks of bark she might be able to send my way. She came back with a backpack full of pieces including hemlock, Doug fir, and a couple others. The most promising one turned out to be a big hunk of Doug fir:

Attachment:
20 CC bark for rosette.jpg


After a couple runs through the thickness sander to take a peek inside:

Attachment:
21 CC bark for rosette.jpg


I ran it through the band saw and ended up with these four thin slabs.

Attachment:
22 CC Bark for rosette.jpg


This is the piece that ended up producing a usable ring:

Attachment:
23 CC bark for rosette.jpg


Routing the ring

Attachment:
24 Bark Rosette.jpg

Attachment:
25 Bark Rosette.jpg


The final ring on the redwood top. I think it'll look good with purfling around it.

Attachment:
27 Bark Rosette.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter



These users thanked the author J De Rocher for the post: Theo (Wed Jan 04, 2017 2:27 pm)
Top
 Profile  
 
PostPosted: Mon Aug 15, 2016 8:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Nice ring, Jay!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Mon Aug 15, 2016 9:10 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I like that rosette ring!

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Mon Aug 15, 2016 2:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
This morning, I was looking at the other rosette ring I had routed yesterday which I had rejected because of a bad area on one side of the ring when I realized that the bad spot can be positioned under the end of the fretboard extension. duh So now I have two rings to choose from. bliss

Attachment:
28 Bark rosette 2.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Tue Aug 16, 2016 9:38 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3290
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
That's just fantastic!

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Tue Aug 16, 2016 11:39 am 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 22, 2012 11:12 am
Posts: 1170
First name: Rodger
Last Name: Knox
City: Baltimore
State: MD
Zip/Postal Code: 21234
Country: USA
Focus: Build
Status: Amateur
Second one looks best to me, I like the darker colors.

_________________
A man hears what he wants to hear, and disreguards the rest. Paul Simon


Top
 Profile  
 
PostPosted: Tue Aug 16, 2016 12:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Rodger Knox wrote:
Second one looks best to me, I like the darker colors.



I agree and so does my daughter. The second one it is.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Tue Aug 16, 2016 9:42 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1161
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
You can send me the first one so it doesn't go to waste ;) [clap] [clap]


Top
 Profile  
 
PostPosted: Wed Aug 17, 2016 12:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
I'm glad you like it, but I'm pretty sure it won't go to waste. [:Y:]

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Wed Aug 17, 2016 8:55 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3551
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
Beautiful! I prefer the first one, but they're both excellent so it really doesn't matter which you use for this guitar. Love the story behind it, too :)


Top
 Profile  
 
PostPosted: Sat Aug 20, 2016 7:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
The Doug fir bark rosette and the soundhole binding are now in. The soundhole binding is bloodwood which is what the body and fretboard binding will be.

Attachment:
29 Rosette & soundhole binding installation.jpg

Attachment:
30 Rosette & soundhole binding.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sun Aug 21, 2016 5:33 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7233
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
That's going to look really good under finish.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Sat Aug 27, 2016 8:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Apr 16, 2012 12:47 pm
Posts: 2417
First name: Jay
Last Name: De Rocher
City: Bothell
State: Washington
Made some progress today. Soundhole cut out, body outlines cut out for the top and back, and surfaces thoroughly sanded. I had planned to put in a bloodwood backstrip to match the binding, but I decided I like the bookmatched joint too much to disrupt it. It doesn't show in the photo, but the fine grain patterns in the redwood top are very cool.

Attachment:
31 Back and top.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Once in a while you get shown the light in the strangest of places if you look at it right - Robert Hunter


Top
 Profile  
 
PostPosted: Sat Aug 27, 2016 9:31 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Jun 14, 2013 6:08 pm
Posts: 218
First name: Gregor
Last Name: Crothers
State: Ontario
Country: Canada
Focus: Build
Status: Amateur
Looking very nice JDR.
Those colours look like they will come together very nicely.
Rosette is super nice of course.

_________________
Wake up and smell the rosewood!



These users thanked the author gregorio for the post: J De Rocher (Fri Sep 09, 2016 8:30 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 112 posts ]  Go to page 1, 2, 3, 4, 5  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com