Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Steve's Baby Bird
http://www.luthiersforum.com/forum/viewtopic.php?f=10145&t=47893
Page 1 of 6

Author:  SteveSmith [ Mon Jun 13, 2016 9:32 am ]
Post subject:  Steve's Baby Bird

I'm in, it'll be a parlor under the price cap. Probably a "big" parlor, a size 0; cause I've got a mold for one of those. That's all I know now - good thing we're not under a short deadline :lol:

Author:  Bryan Bear [ Mon Jun 13, 2016 10:09 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

Welcome, glad to have you in!

I know what you mean. If I finish on time it will be close to the deadline. I still need to make a mold and all that prep stuff. Plus I have been re arranging my shop and can't get to my thickness sander right now. . .

Author:  SteveSmith [ Wed Jun 15, 2016 10:35 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

I think a size 0 is a lot larger than I want to do for this so I'm going to do something more like a size 5. I'm leaning towards a Terz tuning with a scale length of 21.3" (Martin 25.4" scale cut off at the third fret). Not sure if I want to put steel string or nylon on it but probably need to make up my mind pretty soon.

Edit: corrected the scale length

Author:  SteveSmith [ Mon Jun 20, 2016 8:31 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

One of my luthier friends has a size 5 template I can borrow so that seals the deal. I was looking through the wood stash and found a set of olive wood that I didn't have any particular plans for. So the back and sides will be olive. Top will be red spruce. When I get all this mostly figured out I'll post a more formal entry with the what's new, old, etc. ;)

Author:  SteveSmith [ Tue Jun 21, 2016 7:13 pm ]
Post subject:  Steve's 2016 Challenge Entry

Finally found the set of olive wood. It has some flaws that will need to be cut out or repaired but I think it will work nicely.
Image

With a bit at alcohol on it.
Image

Author:  SteveSmith [ Wed Jun 22, 2016 8:35 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

I used to live in N. California and did carpentry there. Got to work on several old houses that were framed in redwood. and I enjoyed working on those. Of course later on I built who knows how many redwood decks in the western US. Anyway, never have used a redwood top and thought that would be cool to try. I found a 2nd grade sinker top at LMI that looked pretty good so I'm going to use that.

Author:  Bryan Bear [ Wed Jun 22, 2016 10:28 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

That sure is pretty!

Author:  Rodger Knox [ Wed Jun 22, 2016 11:07 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

Everything looks better with a bit of alcohol! bliss

Author:  Bryan Bear [ Wed Jun 22, 2016 11:30 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

Just remember, Alcohol is a solution. Just ask a chemist. . .

Author:  SteveSmith [ Wed Jun 22, 2016 12:06 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

you're both right - hic :?

Author:  Alex Kleon [ Tue Jun 28, 2016 7:21 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Where is that olive wood from, Steve? I have some Mediterranean olive that I used for a rosette and some bridge blanks that looks similar, although from a small 1/4 log and a turning blank. Very pretty wood you've got there!

Alex

Author:  SteveSmith [ Tue Jun 28, 2016 8:01 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Alex, I got this some time ago at one of the OLF Swapaloozas. It had some checks that made it unusable for a full size guitar but I liked the wood and it was cheap so I got it anyway. Unfortunately I don't know where it came from but it was good sized for an olive tree.

Author:  SteveSmith [ Mon Jul 04, 2016 3:42 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

I have been collecting materials. The back is joined and the area with checks has been repaired with some wood dust and CA so it looks darker than it will under finish. I received my grade B redwood sinker top from LMI and got it joined as well. I am happy with the top, it is well quartered. Bindings will be curly maple. Next to the top are several pieces of rosewood and an ebony fretboard - not sure but I'm thinking that I'll use ebony for the fretboard and one of the rosewoods for the bridge. Still haven't made up my mind about the neck, I've got lots of mahogany laying around - some that has been in my shop for many years.

I have a set of LMI's 3/4 size plans which are similar to a Martin Size 5 but I also have some details from vintage parlor guitars that I might incorporate as well. I never stick to plans anyway.

So here's how it shakes out:
- The new part will be to build a parlor,to use Terz tunning, and this will also be the first time I've used a redwood top.
- The local part will be some black locust for the bridge plate and maybe some other stuff.
- The something old will probably be the neck laminated from wood that has been in my scrap pile for many years.
- For the pick two this will definitely be a parlor and will be under the budget.

Image

Author:  Bryan Bear [ Mon Jul 04, 2016 8:00 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

That redwood top has a great color. I 'm glad you are making a terz, that should be fun to hear.

Author:  SteveSmith [ Tue Jul 12, 2016 5:39 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Been a week since my last post. I can say I have been thinking about it but no other progress to show.

Author:  SteveSmith [ Sun Jul 31, 2016 1:15 pm ]
Post subject:  Steve's 2016 Challenge Entry

Found a piece of Macassar Ebony in the stash that is rift sawn, over 0.4" thick and long enough for a fretboard and bridge.Image

Author:  SteveSmith [ Sun Jul 31, 2016 1:48 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Looked around and found a piece of mahogany that's out of a good-sized stash another luthier traded me for an old workbench. Love that new #6.
Image

Leveled the top of the neck prior to laying it out so just for fun I measure a shaving, a little over 0.001". Image

Author:  SteveSmith [ Sun Jul 31, 2016 3:20 pm ]
Post subject:  Steve's 2016 Challenge Entry

I'm feeling like I at least accomplished a little on this one today. Got the neck cut out and the ears glued on. Image

Mac ebony cut and thinned. I like it.
Image

Author:  Bryan Bear [ Sun Jul 31, 2016 4:17 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

That Mac and the soundboard go well together! Looks like you are rolling now.

Author:  SteveSmith [ Fri Aug 05, 2016 12:46 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

So I got the neck knocked out pretty quick and it looks real nice. I started putting some layout lines on it to do some more cuts and danged if I didn't screw up the measurements, the neck is too short. I could kluge it but not interested so guess it's back to the wood pile to find another hunk of hog idunno

Author:  Bryan Bear [ Fri Aug 05, 2016 1:47 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Rats! Perhaps the next bit of wood will end up being better.

Author:  SteveSmith [ Fri Aug 05, 2016 3:56 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Bryan Bear wrote:
Rats! Perhaps the next bit of wood will end up being better.


It will if I move a bit slower duh

Author:  Bryan Bear [ Fri Aug 05, 2016 3:59 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

You should move as slowly as I do, then you wouldn't even have a chance to make a mistake.

Author:  SteveSmith [ Fri Aug 05, 2016 5:41 pm ]
Post subject:  Re: Steve's 2016 Challenge Entry

Bryan Bear wrote:
You should move as slowly as I do, then you wouldn't even have a chance to make a mistake.


:lol:

Well, that little piece of hog was perfect for that neck. Had some bad spots that made it unsuitable for a full-size guitar but I was able to work around them for the smaller neck. I'll keep it and throw it in the bin for a possible future build. Fortunately I have lots of hog so I just need to make up my mind on what to use. Unfortunately I have a client guitar that I have to finish by tomorrow evening so it will probably by Sunday afternoon before I can get back to this project.

Author:  Clinchriver [ Sun Aug 07, 2016 6:57 am ]
Post subject:  Re: Steve's 2016 Challenge Entry

SteveSmith wrote:
Looked around and found a piece of mahogany that's out of a good-sized stash another luthier traded me for an old workbench. Love that new #6.
Image

Leveled the top of the neck prior to laying it out so just for fun I measure a shaving, a little over 0.001". Image


You really have that #6 working! Looks like a fun project.

Page 1 of 6 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/