Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 05, 2024 2:16 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Something I’d buy...
PostPosted: Thu May 30, 2019 7:04 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
I totally wish these 2 alignment / scale tools were combined some way into one. Given a reasonable price I’d buy it today.

Image


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Thu May 30, 2019 7:16 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
I know it can be done w a strait edge but man I like specialty jigs haha


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Fri May 31, 2019 8:01 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1702
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I have that tool, I work with just three scale lengths, so I measured from the end of the tool to where I would put the front edge of the 1 string for those scale lengths and marked the positions on the tool with a scribe. With a nut or nut blank installed in the neck I put the end of the tool against the nut and place the bridge with the scribed mark as a reference.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Fri May 31, 2019 8:35 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
johnparchem wrote:
I have that tool, I work with just three scale lengths, so I measured from the end of the tool to where I would put the front edge of the 1 string for those scale lengths and marked the positions on the tool with a scribe. With a nut or nut blank installed in the neck I put the end of the tool against the nut and place the bridge with the scribed mark as a reference.

Yea that’s kinda what I did ... but man it would be cool if someone designed one that would be adjustable / be an all in one.

We know how important scale length is... and how important it is to get that bridge right in line with the neck line...


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Fri May 31, 2019 8:36 am 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Btw I didn’t mean for this to be in the neck jig forum ha oops


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Fri May 31, 2019 1:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
The issue with the jig you are describing is it would have to accommodate various scale lengths. Also, how do you handle compensation? It gets complicated pretty quick. I designed a centering jig and that is straightforward because there is no need for variability on that part. I will go take a photo of what I came up with.


Top
 Profile  
 
PostPosted: Fri May 31, 2019 2:37 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1707
Barry Daniels wrote:
The issue with the jig you are describing is it would have to accommodate various scale lengths. Also, how do you handle compensation? It gets complicated pretty quick. I designed a centering jig and that is straightforward because there is no need for variability on that part. I will go take a photo of what I came up with.

I’d assume the compensation would be handled by cutting the spot after the bridge was placed. Or maybe put some little spikes on it like the stew Mac doohickey


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Fri May 31, 2019 6:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7371
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I have both of those jigs. Love the center finder when I'm setting a neck but don't feel that it is a great tool for setting bridges and I don't use it for that. I set the bridge based on a measurement from the the neck/body join or the 12th fret center. After the bridge is installed I use the StewMac jig to locate the leading edge of the saddle and cut the slot on the guitar. Combining the two would not be useful for me. Different strokes I suppose.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Fri May 31, 2019 6:33 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3260
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Here is my centering jig. I made it with hardware scavenged from a hand screw clamp. The two bolts are half right hand thread and half left hand so this keeps the posts centered. The jig is easy and quick to use, and I find it quite accurate.

I also made a small device that slides on the centering jig to locate bridges, but I don't use that very much.


You do not have the required permissions to view the files attached to this post.



These users thanked the author Barry Daniels for the post: jimjaillet (Sun Sep 05, 2021 4:25 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com