Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 11:52 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Fri May 01, 2020 3:45 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
does anyone know this measurement please? (on a PRS knife edge tremolo screw):
from 'head' to slot....
I want to make a 'spacer'/gauge/tool.


You do not have the required permissions to view the files attached to this post.

_________________
drugstoredir2014.com


Top
 Profile  
 
PostPosted: Fri May 01, 2020 5:51 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
You have no calipers or a micrometer?

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri May 01, 2020 7:09 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
Chris Pile wrote:
You have no calipers or a micrometer?


I have a digital vernier caliper.

I think I also have a micrometer in somebodies garage somewhere?

and metal rulers of various thicknesses + feeler gauges.

But I just wondered if anyone already knew without me having to dismantle the whole thing again.

_________________
drugstoredir2014.com


Top
 Profile  
 
PostPosted: Fri May 01, 2020 11:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Take out one screw, not all of them.

_________________
"Act your age, not your shoe size" - Prince



These users thanked the author Chris Pile for the post: the_doc735 (Sat May 02, 2020 12:51 am)
Top
 Profile  
 
PostPosted: Sat May 02, 2020 12:51 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
Chris Pile wrote:
Take out one screw, not all of them.


right!
bliss

_________________
drugstoredir2014.com


Top
 Profile  
 
PostPosted: Sat May 02, 2020 8:13 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" :mrgreen:
Good Luck



These users thanked the author Clinchriver for the post: the_doc735 (Mon May 04, 2020 2:38 pm)
Top
 Profile  
 
PostPosted: Mon May 04, 2020 2:43 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
Clinchriver wrote:
Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" :mrgreen:
Good Luck


can't find that page?

_________________
drugstoredir2014.com


Top
 Profile  
 
PostPosted: Tue May 12, 2020 4:20 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
the_doc735 wrote:
Clinchriver wrote:
Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" :mrgreen:
Good Luck


can't find that page?


https://www.youtube.com/watch?v=cHA_xu844Rs



These users thanked the author Clinchriver for the post: the_doc735 (Wed May 13, 2020 6:09 am)
Top
 Profile  
 
PostPosted: Wed May 13, 2020 6:10 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Feb 25, 2020 11:25 am
Posts: 46
Location: UK
First name: paul
Last Name: staples
City: Hull
State: east yorkshire
Zip/Postal Code: HU94QF
Country: United Kingdom
Focus: Repair
Status: Amateur
Clinchriver wrote:
the_doc735 wrote:
Clinchriver wrote:
Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" :mrgreen:
Good Luck


can't find that page?


https://www.youtube.com/watch?v=cHA_xu844Rs


great!

_________________
drugstoredir2014.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com