Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Sourcing a Gibson decal?
http://www.luthiersforum.com/forum/viewtopic.php?f=10137&t=52827
Page 1 of 1

Author:  Ken Jones [ Thu Jan 16, 2020 9:11 am ]
Post subject:  Sourcing a Gibson decal?

Gibson puts a decal in the exact spot where the neck/headstock “evil smile” breaks tend to occur in Les Pauls. This seems by design, though not sure of the reason. Image

Has anyone successfully gotten a replacement from Gibson to install after headstock repair? It seems like this would be very common considering the frequency of this particular repair. I’ve found fakes on eBay, but they lack the black border of the original.


Sent from my iPhone using Tapatalk Pro

Author:  dofthesea [ Sat Jan 18, 2020 1:47 pm ]
Post subject:  Re: Sourcing a Gibson decal?

Look up Uncle Nerky on fb. he does custom logos

Author:  DanSavage [ Tue Jan 21, 2020 5:05 pm ]
Post subject:  Re: Sourcing a Gibson decal?

The tricky part isn't the artwork, or even printing with a black outline. The real trick is printing metallic gold.

I've got an ALPS 5000 printer which is capable of printing these logos with either foil or metallic ink onto water-slide decal paper.

Here's a couple of examples I've done.

Martin logo done in gold foil.

Image

Image

Ovation logo done in gold metallic.

Image

Gibson logo artwork with black outline.

Image

Author:  DanSavage [ Thu Jan 30, 2020 1:34 pm ]
Post subject:  Re: Sourcing a Gibson decal?

Here's the results of the test batch.

Image

Image

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/