| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Double bass setup http://www.luthiersforum.com/forum/viewtopic.php?f=10137&t=52006 |
Page 1 of 1 |
| Author: | Freeman [ Tue Jun 04, 2019 11:19 am ] |
| Post subject: | Double bass setup |
I have been asked to help a friend restring his wife's double bass and basically do whatever is necessary to get it playing as good as possible. Can someone point me to a good tutorial on double bass action. It is an old Kay plywood bass, right now there is about 0.010 on the E and G strings at the nut, the relief as measured in the center of the fretboard with a straightedge resting at the ends is about 0.055, the action at the mid point of the strings ("12th fret") is 0.190 on the G and 0.250 on the E. There is a pretty significant groove down the fretboard under the E string. She plays mainly a "slap style" I guess you call it, amplifies the bass with a mic at the bridge. As far as I can tell, the bass is structurally sound and the post is in place. The old strings are probably several years old, my friend new ones on order, and I just wanted to start getting ready. |
|
| Author: | Clinchriver [ Tue Jun 04, 2019 5:26 pm ] |
| Post subject: | Re: Double bass setup |
Touch base with James Condino. http://condino.com |
|
| Author: | SteveSmith [ Tue Jun 04, 2019 6:57 pm ] |
| Post subject: | Re: Double bass setup |
Clinchriver wrote: Touch base with James Condino. http://condino.com Yep, James is the man on those old Kay basses.
|
|
| Author: | Freeman [ Tue Jun 04, 2019 8:51 pm ] |
| Post subject: | Re: Double bass setup |
Thanks guys, I knew I had read some articles about repairing old double basses and now I remember that he was the author. |
|
| Author: | CarlD [ Tue Jun 04, 2019 10:47 pm ] |
| Post subject: | Re: Double bass setup |
I found this one day, http://www.dennishavlena.com/bassetup.htm. That link has a pretty complete setup description. I've got an old Kay too, a remnant of my folk and bluegrass days. Neck heel has a couple of cracks. I've got an old copy of "Stringed Instrument Craftsman" were Ken Donnell describes a repair done with a lag bolt (I think you have articles in there too, Mr. Pile). I'm gonna try it with a timber screw. The finish is cracking up and falling off in little flakes. I'm gonna try to stabilize it with a lacquer/retarder mix, then nitro clear coats. It'll be in the tradition of a "rat rod." The fingerboard is a big hunk of BRW (...sigh......all those bridges). |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|