Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 11:41 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue May 07, 2019 8:44 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 982
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
A client brought a 2010 Epiphone into the shop that he’d picked up “at a good price”. Not an expensive instrument, but super clean. Trouble is, it buzzes like mad so could I “please sort that out?” Turns out there’s a back bow in the neck — at least -0.025” relief. Story goes that guitar was stored for a number of years without strings, leaving the truss rod untouched.

You guessed it, the rod is a one way. I put it into clamps, forcing the maple neck into a forward bow for several weeks and added a set of super heavy strings to boot. It’s a trick I’ve used successfully a couple of times before, but this time I only got half way to flat, so the guitar remains unplayable.

While that guitar was here, a 2015 Epiphone LP came through with back bow almost as bad. Fortunately, it has a 2-way rod, so it was quickly set up without drama, and out the next day.

I gave the Sheraton back to its owner this week. I could perhaps establish a usable fret plane by levelling the frets, but the differences in fret heights would feel really strange. Or I could pull the frets and level the fingerboard, but I fear we’d sand right through the centre inlays. In any event, neither procedure is really in the budget.

So, I admitted defeat and cried “uncle”! Not sure what else I could do for the fellow. I think he’ll turn it into a clock.

Image


Sent from my iPad using Tapatalk


Top
 Profile  
 
PostPosted: Tue May 07, 2019 9:10 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 409
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
I haven't straightened a guitar neck yet, but the bass necks I've done have required at least three episodes of clamps with heat and humidity. Time consuming, but usually effective.


Top
 Profile  
 
PostPosted: Wed May 08, 2019 5:36 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Even if you do get them straight they generally go back in a few years anyway. The wood doesn't forget and is prone to do what is in it's nature. Bet if you look close at those necks the grain of the wood isn't the best or even close.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Wed May 08, 2019 6:39 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
We are not fans of heat treating and won't even do it any more even though we are all tooled up to do it, it often will not last.

The option that would have helped here but as you said my friend there was no budget for it would be to remove the frets, remove the inlays in the middle of the neck, level the board, mill in fall-away, reinstall the inlays, fret, play, drink, enjoy. The drink part doesn't have to be in this order of course... ;)

Not a day goes by that someone does not come into our shop with "look at what I got at a yard sale or on eBay" etc. It's often the case that the thing has been long abandoned because others that came before us already found out that it's toast in respect the economics of its presumed worth and the cost of repairs by a quality provider.

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Wed May 08, 2019 11:08 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 982
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
Well, he can part out the PUPs, the Grovers and the like-new case, and he might recover much of his “great price” investment.


Sent from my iPad using Tapatalk


Top
 Profile  
 
PostPosted: Thu May 23, 2019 10:07 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 24, 2013 9:06 am
Posts: 102
First name: Mark
Last Name: Gammell
State: NE
Country: USA
I second Hesh's approach. Like Brian said, wood always only learns bad habits.

_________________
"Real guitars are for old people, Mr. Marsh."

Eric Cartman


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com