Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Mar 19, 2024 1:36 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Fretless Bass FB coating
PostPosted: Mon Sep 18, 2017 6:05 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 409
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
I have a customer inquiring about this. Any recommendations?


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 6:10 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5739
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
I've used carefully applied cyanoacrylate glue. Buffs out to a fine shine, and is hard and long lasting.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 6:54 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3224
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I've used West Systems epoxy.


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 7:05 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 409
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
Any thoughts on TruOil for this application?


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 7:09 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 02, 2008 4:01 pm
Posts: 1104
Location: Winfield, IL.
It'll wear through in a matter of hours of playing.


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 8:12 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5739
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Yeah, not hard enough.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Mon Sep 18, 2017 8:38 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 409
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
Pretty much what I figured.

Of course if the guy hadn't used roundwounds...


Top
 Profile  
 
PostPosted: Tue Sep 19, 2017 7:24 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
I built a fretless ABG for a customer, he comes back to the shop with the darn thing about every 6 months to have the fingerboard sanded. I also get to repair various cracks and splits in the plates and sides, and he has almost worn a Willy Nelson style hole where he keeps his thumb, this thing gets played heavily, and a LOT! All the fingerboard markers are replaced by now. He doesn't want a coating because of what it does to the sound. The board is good quality ebony, but he wears grooves into it in no time, it would surprise me if super glue or epoxy would prevent this for very long. How does the board feel when the coating is partially worn off?

_________________
Rian Gitar og Mandolin


Top
 Profile  
 
PostPosted: Tue Sep 19, 2017 9:04 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5739
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
On the fingerboards I have coated with cyano glue, I put it on thick enough to resist heavy wear. There will be marks on the surface of the finish from the strings, but no erosion. Back in the 80's I did my fretless Jazz this way, and even today it still looks good. The guy I sold it to plays every weekend, and in lessons for nearly 30 years. You can't be shy about slathering it on. As for the sound - I can tell no difference between coated and uncoated boards.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Tue Sep 19, 2017 9:50 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12964
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
fumblefinger wrote:
I have a customer inquiring about this. Any recommendations?


It's a can of worms... or can be.

It's not unusual for fretless bass players to want VERY low action and that's when the board finish needs to be addressed with the same precision as frets on a fretted instrument. Or, in other words the quality of the level set, relief, etc. of the fret plane becomes critical.

Any finish that can't also be precision leveled as if the finish was the fret tops will be a pain in the arse to work with AND maintain since stuff moves or may.

No finish at all as Arnt mentioned is the most serviceable in our experience and periodic leveling is likely going to be necessary with or without finish.

OTOH if the action is say 5 - 7 (64th" at the 12th) it won't matter much how unlevel the finish might be. But if your player wants action of 2/64th" and 4/64th" the finish can make or break the instrument's ability to be set-up as requested.

With all of this said another approach to client requests for fretless finishes is to hang up on them, lock the door and go drinking....

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: Clinchriver (Tue Sep 19, 2017 4:40 pm)
Top
 Profile  
 
PostPosted: Tue Sep 19, 2017 1:05 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3224
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Just install a phenolic fretboard when the client is not looking. ;-)



These users thanked the author Barry Daniels for the post: Hesh (Tue Sep 19, 2017 3:42 pm)
Top
 Profile  
 
PostPosted: Tue Sep 19, 2017 1:58 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 409
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
Thanks for the responses guys. I know this board is a de-fretted board and it wasn't done too carefully. Then the original owner filled the slots with wood filler. I'll see if I can talk him into letting me just sand it clean and persuade him away from the round wounds.

Thanks again.



These users thanked the author fumblefinger for the post: Hesh (Tue Sep 19, 2017 3:42 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com