Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Tenor Guitar Bridge Needed
http://www.luthiersforum.com/forum/viewtopic.php?f=10137&t=49472
Page 1 of 1

Author:  Grandpa G [ Thu Jun 15, 2017 11:07 am ]
Post subject:  Tenor Guitar Bridge Needed

Hi All,
I am thinking of converting a Harmony H150 "Studio Special" guitar into a 4 steel string baritone ukulele. The instrument comes with the old screw on bridge. I am looking for someone to make a simple 4 string pin bridge. I could provide a plan. (.5" string spacing)
Thanks in advance,
Grandpa G

Author:  johnparchem [ Thu Jun 15, 2017 12:16 pm ]
Post subject:  Re: Tenor Guitar Bridge Needed

Are you looking for a classical shaped ukulele bridge? If so How can you go wrong for 6.95
[url]
https://www.amazon.com/A2860-Ukulele-Ro ... ele+bridge[/url]

Stewmac has one you can drill yourself or one with 13.6 mm.
http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by_Instrument/Ukulele_Parts/Bridges/Ukulele_Bridge_with_Saddle.html


Neither exactly .5" but close.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/