Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:59 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 20 posts ] 
Author Message
PostPosted: Tue Sep 27, 2016 8:52 am 
Offline
Walnut
Walnut

Joined: Tue Sep 27, 2016 12:16 am
Posts: 6
First name: James
Last Name: Bill
City: Southfield
State: Massachusetts
Zip/Postal Code: 01259
Country: United States
Focus: Repair
Status: Amateur
Hi All,

I found a Gibson SG Special Faded from 2008 that appears to be in excellent condition other than the fact that it looks like the heal has been repaired. The strange thing about it is that the area where it has been repaired is both kinda amateurish looking and yet somehow pretty consistent with the finish of the rest of the neck and neck joint. It looks like the cracks have perhaps been filled with grain filler? (dark black patches) and there seems to be dark caked patches of the same material around the heal joint and along the neck. There looks like there is a patch of router tear along the neck with the same caked up black substance (again, grain filler?). There are tool marks along the side of the fingerboard and a black tool mark on the neck side of the joint. I guess I am trying to eliminate the possibility that it came out of the factory like this. The pictures I've seen of neck/heal repairs don't seem to be finished like this. Any thoughts?


You do not have the required permissions to view the files attached to this post.


Last edited by konkapotrock on Tue Sep 27, 2016 1:00 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 11:08 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
Have you pulled the neck pup out to see what is going on there? Remember that SG's have fairly short tenons compare to LP's (and some have the infamous "short tenon" that were prone to failure).


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 11:20 am 
Offline
Walnut
Walnut

Joined: Tue Sep 27, 2016 12:16 am
Posts: 6
First name: James
Last Name: Bill
City: Southfield
State: Massachusetts
Zip/Postal Code: 01259
Country: United States
Focus: Repair
Status: Amateur
No. I didn't think of removing the pickup. But I did think that removing the pickguard might give me a better view of whats going on. I guess the pickups are mounted to the pickguard anyway. Maybe I will take a look at the pickup cavity tonight.


Last edited by konkapotrock on Tue Sep 27, 2016 12:51 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 11:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Looks like a fairly large chunk of the body by the neck joint got chipped out. Doesn't look factory.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 1:01 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
That's got to be a hack refinish job. You can see the non-scraped F/B edge, frets, no filler. Is the body filled?


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 1:21 pm 
Offline
Walnut
Walnut

Joined: Tue Sep 27, 2016 12:16 am
Posts: 6
First name: James
Last Name: Bill
City: Southfield
State: Massachusetts
Zip/Postal Code: 01259
Country: United States
Focus: Repair
Status: Amateur
Haans wrote:
Is the body filled?


Do you mean the cracks in the heal? If so it does look like they are filled with the black resin like material, which I have been assuming is wood filler. I apologize, I am very much a novice in this area. If however you are asking whether the entire body of the guitar has been properly filled it looks totally normal. Here's another picture of the fretboard issues which I didn't initially think had anything to do with the possible heal repair.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 1:41 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
konkapotrock wrote:
No. I didn't think of removing the pickup. But I did think that removing the pickguard might give me a better view of whats going on. I guess the pickups are mounted to the pickguard anyway. Maybe I will take a look at the pickup cavity tonight.


If those are humbuckers the pups are mounted to rings which mount to the top. If they are P90's or something similar they are probably mounted to the pickguard with a bracket. Anyway, take the neck pickup out and see what you've got in the cavity. Here is one picture that shows the difference between long and short tenons - I've heard that the short ones can fail pretty easily

http://forum.gibson.com/index.php?/topi ... ort-tenon/

I also had a case where when the neck started loosening on this cheap SG looking thing they just dumped a bunch of epoxy in the cavity.

Image

I think you'll know a lot more when you look in yours


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 2:17 pm 
Offline
Walnut
Walnut

Joined: Tue Sep 27, 2016 12:16 am
Posts: 6
First name: James
Last Name: Bill
City: Southfield
State: Massachusetts
Zip/Postal Code: 01259
Country: United States
Focus: Repair
Status: Amateur
I'm pretty sure after some brief internet research that these models have short tenons.


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 4:28 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
You have open pores on the neck back and heel. The grain is not filled, looks like a terrible sanding job leaving splotches of the old color dark and into the end grain. I really wouldn't think that this would be something that Gilson would do and let out of the factory. As I said, looks like a very bad piece of work by a rank amateur.
Then again, I don't know much about solid body 'lectrics...


Top
 Profile  
 
PostPosted: Tue Sep 27, 2016 6:12 pm 
Offline
Walnut
Walnut

Joined: Tue Sep 27, 2016 12:16 am
Posts: 6
First name: James
Last Name: Bill
City: Southfield
State: Massachusetts
Zip/Postal Code: 01259
Country: United States
Focus: Repair
Status: Amateur
Haans wrote:
You have open pores on the neck back and heel. The grain is not filled, looks like a terrible sanding job leaving splotches of the old color dark and into the end grain. I really wouldn't think that this would be something that Gilson would do and let out of the factory. As I said, looks like a very bad piece of work by a rank amateur.
Then again, I don't know much about solid body 'lectrics...


Ah, I see. Some of this is probably part of the aesthetic of this budget Gibson series. The "Worn" or "Faded" series guitars seem to either have a lot of wide porous grain or conversely the dark set in smudges. Here are some photos of other faded series guitars off of google. The brown example, an advertising photo I think, shows the presence of the rough blackened areas that are reminiscent to some of the areas on the heal of my guitar.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Sep 28, 2016 5:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Wow, Gilson has sunk to a new low...go Henry!
Anything for a buck.


Top
 Profile  
 
PostPosted: Wed Sep 28, 2016 8:54 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
Wow, Gibson has sunk to a new low..


The trend in many guitars right now is flat finishes, some without grain filling. The prevailing thought of the guitar buying public right now is that thick shiny finishes inhibit the tone of the guitar (they do to a degree). Also, flat finishes are in fashion EVERYWHERE - new cars, etc. Haven't you noticed?

And since a smart business guy gives the people what they want.... and it reduces the cost of guitar production, what's the problem? It makes sense. Time is money, folks - and finishing is the longest operation of producing a guitar. Reduced time, result in more profit. I don't blame anyone for doing it. I am, too.

Seagull has been doing flat finishes since the late 80's. They were the trend setters. We are just catching on to the wisdom of flat finishes in the last 5 years. Get on the wagon.

By the way - I didn't see anything wrong with the repair on the SG. The guy made his repair match the factory finish. Good for him.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Wed Sep 28, 2016 5:05 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Hardly worth a reply...
Just don't see what we ever could have in common.


Top
 Profile  
 
PostPosted: Thu Sep 29, 2016 10:07 am 
Offline
Cocobolo
Cocobolo

Joined: Thu Oct 27, 2011 11:28 am
Posts: 183
First name: Leonard
Last Name: Duke
City: Kalamazoo
State: MI
Zip/Postal Code: 49001
Country: USA
Focus: Repair
Status: Amateur
Whether it was fixed in the factory or not, it would be impossible to fix that heel without causing fret issues.


Top
 Profile  
 
PostPosted: Thu Sep 29, 2016 3:27 pm 
Offline
Walnut
Walnut

Joined: Tue Sep 27, 2016 12:16 am
Posts: 6
First name: James
Last Name: Bill
City: Southfield
State: Massachusetts
Zip/Postal Code: 01259
Country: United States
Focus: Repair
Status: Amateur
philosofriend wrote:
Whether it was fixed in the factory or not, it would be impossible to fix that heel without causing fret issues.


Could you expound on that?


Top
 Profile  
 
PostPosted: Thu Sep 29, 2016 6:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
Whether it was fixed in the factory or not, it would be impossible to fix that heel without causing fret issues.


Quote:
Could you expound on that?


^^^^^Yeah, what he said.^^^^^
Because I could fix it without fret issues.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Oct 07, 2016 10:30 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
Chris Pile wrote:
Quote:
Whether it was fixed in the factory or not, it would be impossible to fix that heel without causing fret issues.


Quote:
Could you expound on that?


^^^^^Yeah, what he said.^^^^^
Because I could fix it without fret issues.


Im in the " Explain Please " camp as well idunno

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
PostPosted: Thu Dec 08, 2016 11:55 am 
Offline
Walnut
Walnut
User avatar

Joined: Sat Nov 26, 2016 3:51 pm
Posts: 37
First name: Lou
Last Name: Moritz
City: Fords
State: New Jersey
Zip/Postal Code: 08863
Country: United States
This is the style neck joint on newer SG's, Similar to LP's but shorter tenons.

The tenon is visible in the pickup route but the entire pickguard would have to be removed.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Thu Dec 15, 2016 12:14 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Mar 26, 2009 6:46 pm
Posts: 126
First name: William
Last Name: Bustard
Country: CANADA
Just looks like the SG took a smash and broke the neck loose-with some breakage too
and someone glued it back together
with epoxy - the epoxy might have reacted with the finish repair turning it black-
might have just rubbed it with a bit of poly or something
I think the finish on those faded models do not always have much if any grain filler
-sometimes even splotchy and only partially filling here and there just to achieve a balanced look for the color-
maybe more of a thick sanding sealer

_________________
You just pick up a chord, go twang, and you're got music. -Sid Vicious


Top
 Profile  
 
PostPosted: Thu Dec 22, 2016 8:29 am 
Offline
Mahogany
Mahogany

Joined: Sun May 09, 2010 6:10 am
Posts: 64
First name: David
Last Name: Radlin
City: Belle River
State: Ontario
Zip/Postal Code: N0R 1A0
Country: Canada
Focus: Repair
Status: Semi-pro
Haans wrote:
As I said, looks like a very bad piece of work by a rank amateur.


That's a rush to judgement, as we don't know the backstory to the repair.

The degree to which a customer desires or can afford to take a repair is a common consideration. So could have been a limited budget job with function prioritized above aesthetic.

Could have been that the guitar value didn't justify a fully restorative repair.

Could have been a kid who was proud to get the repair that far.

Even professionals started somewhere, and I suspect that most or all would later in their career like a do-over on a past repair.

My question: what would you do to clean it up?

_________________
David Radlin
http://www.facebook.com/radlin.guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com