Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 3:45 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Top crack repair
PostPosted: Sat Jun 25, 2022 11:07 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 22, 2014 4:59 pm
Posts: 285
Location: sandwich, kent
State: kent
Country: United Kingdom
Focus: Build
Small impact crack near the bridge on a cedar top. Not done any repairs but built maybe ten acoustics. Any ideas to start? Lightly built, fair bit of belly behind the bridge. Strings are slack but a bit of a crease with tension at the crack. Image

Sent from my SM-J600FN using Tapatalk


Top
 Profile  
 
 Post subject: Top crack repair
PostPosted: Sun Jun 26, 2022 7:17 am 
Offline
Koa
Koa

Joined: Tue Jan 15, 2013 10:00 pm
Posts: 980
First name: Josh
Focus: Build
Status: Amateur
mike-p wrote:
Small impact crack near the bridge on a cedar top. Not done any repairs but built maybe ten acoustics. Any ideas to start? Lightly built, fair bit of belly behind the bridge. Strings are slack but a bit of a crease with tension at the crack. Image

Sent from my SM-J600FN using Tapatalk

Any crease in that region is cause to check for a loose x-brace or tone bar internally. Especially after a sharp impact and definitely if you think you are seeing more belly than you should. Start with a really thorough internal inspection.



These users thanked the author joshnothing for the post: Hesh (Mon Jun 27, 2022 4:51 am)
Top
 Profile  
 
 Post subject: Re: Top crack repair
PostPosted: Sun Jun 26, 2022 12:24 pm 
Online
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3227
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
In regards to repair, determine if there is any internal reinforcement directly under the impact from bracing or the bridge plate. If not, then a small patch might be appropriate.

A steam dent removal process would probably bring the dent closer to level. Also, a little bit of CA would fill the remaining dent and bond the fractures.



These users thanked the author Barry Daniels for the post (total 2): Hesh (Mon Jun 27, 2022 4:51 am) • mike-p (Sun Jun 26, 2022 4:11 pm)
Top
 Profile  
 
 Post subject: Re: Top crack repair
PostPosted: Sun Jun 26, 2022 4:13 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Jan 22, 2014 4:59 pm
Posts: 285
Location: sandwich, kent
State: kent
Country: United Kingdom
Focus: Build
Thanks Barry, I had to start a new thread to post the inside picture. Im feeling empowered! I'll try to post some more pictures, a lively handmade English guitar in classical style but for steel strings, cedar over Brazilian rosewood.

Sent from my SM-J600FN using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com