Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Oct 03, 2024 11:36 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Fri Apr 24, 2020 1:59 pm 
Offline
Walnut
Walnut

Joined: Sun Mar 15, 2020 7:59 am
Posts: 6
First name: Bret
Last Name: Deardorff
City: Topeka
State: KS
Zip/Postal Code: 66614-4854
Country: United States
Focus: Build
Status: Amateur
Hi everyone,

I just successfully routing my first two radius discs out of MDF. I read somewhere that those discs can warp if you don’t put some kind of a finish on them or glue them to another full thickness piece of MDF. Any insight on what is the best way to do this. Should I put some kind of finish on them or glue them to another backer board of MDF. Thanks so much for your help.


Top
 Profile  
 
PostPosted: Fri Apr 24, 2020 5:25 pm 
Offline
Koa
Koa

Joined: Mon Jul 11, 2005 5:17 am
Posts: 1008
Location: United States
City: Tyler
State: Texas
I glued mine to another 3/4” mdf. I didn’t put any finish on them though. They haven’t warped. I have one that I left single without the backer and it is warped.


Top
 Profile  
 
PostPosted: Fri Apr 24, 2020 6:49 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Feb 12, 2009 12:12 pm
Posts: 3293
First name: Bryan
Last Name: Bear
City: St. Louis
State: Mo
Country: USA
Focus: Build
Status: Amateur
I don’t have any answer to the question but this post is in the 2013 new builder’s challenge forum which no one is still looking at. Only people who use the “view new posts” feature will ever see it. . .

_________________
Bryan Bear PMoMC

Take care of your feet, and your feet will take care of you.


Top
 Profile  
 
PostPosted: Fri Apr 24, 2020 8:48 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3259
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
Absolutely apply finish. It will protect it from moisture and glue. I use shellac or Zinnser SealCoat.


Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 7:32 am 
Offline
Walnut
Walnut

Joined: Sun Mar 15, 2020 7:59 am
Posts: 6
First name: Bret
Last Name: Deardorff
City: Topeka
State: KS
Zip/Postal Code: 66614-4854
Country: United States
Focus: Build
Status: Amateur
How many coats Barry. That MDF really sucks up the finish!


Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 9:12 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sun Jun 02, 2013 8:16 am
Posts: 477
First name: Brian
City: U.P.
State: Michigan
Focus: Build
I did the same thing Barry did. I clamped the dish and the backer to the top of my table saw to keep them flat. Glued and screwed and left clamped for a couple days for the moisture from the glue to dissipate.

Many coats of Zinnser Seal Coat, I'm thinking 7 or 8, maybe more. I wanted a smooth surface to be able to peel off PSA adhesive on sand paper.

If I did it again I'd screw and glue two radius dishes together back to back and save some MDF and shop space.


As a side note-
I used Zinnser on my MDF bending molds after testing every kind of finish in my shop with heat of bending blankets. I was surprised to discover that nearly every other finish turned to a sticky goo in the presence of heat and shellac held up the best. I put fewer coats on the mold, but enough to seal the MDF.

_________________
Brian R, Wood Mechanic
N8ZED



These users thanked the author rbuddy for the post: Girlsdadx3 (Sat Apr 25, 2020 9:52 am)
Top
 Profile  
 
PostPosted: Sat Apr 25, 2020 12:17 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Aug 19, 2005 4:02 am
Posts: 3259
Location: The Woodlands, Texas
First name: Barry
Last Name: Daniels
I applied enough coats until I started to get a build up that I could sand smooth. I don't remember how many coats but it was probably 4 or 5.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com